GRS vs RCS: Recycled Polyester Claims That Hold Up
GRS vs RCS for recycled polyester garments: the 50% and 5% thresholds, how transaction certificates trace the chain, and the papers to check before you claim.

Answer first: The Recycled Claim Standard (RCS) and the Global Recycled Standard (GRS) both certify recycled content and trace it through a chain of custody. The GRS adds social, environmental and chemical requirements and a higher minimum: a GRS label needs at least 50% recycled content, while the RCS applies to products with at least 5%. A claim holds up when your supplier holds a valid scope certificate and the shipment is covered by a transaction certificate (TC) showing the exact recycled percentage. We checked Textile Exchange’s published documents on 12 November 2026.
Recycled polyester is one of the most common sustainability requests from apparel buyers, and one of the easiest to get wrong. “Made with recycled polyester” can mean 5% or 100%, certified or merely stated. This article explains how the GRS and RCS differ, how the TC chain works, what the thresholds mean for the label you can print, and which documents to ask for. It is general information about published standards, not an audit or legal advice.
What the two standards are
Textile Exchange owns both standards and does not certify companies itself; independent certification bodies audit each stage of the supply chain. Its documents describe them like this:
- RCS: an international, voluntary standard for third-party certification of recycled input and chain of custody. It does not address social or environmental aspects of processing and manufacturing, quality or legal compliance.
- GRS: a full product standard covering recycled input, chain of custody, social and environmental practices and chemical restrictions. GRS sites must meet social and environmental requirements, and chemicals with potential for harm are not permitted on GRS products.
Both accept pre-consumer and post-consumer material that meets the ISO definition of “recycled”. Textile Exchange’s FAQ summarises the difference: the RCS and GRS are the same, except that the GRS is more rigorous, with a higher minimum content percentage (50%) and additional processing requirements.
GRS vs RCS at a glance
| Question | RCS | GRS |
|---|---|---|
| What does it verify? | Recycled content and chain of custody | Recycled content, chain of custody, social and environmental practice, chemical limits |
| Minimum recycled content | At least 5% for the standard to apply | 50% for the product label; 20% is the floor for business-to-business use |
| Logo categories | RCS Blended (5% to under 95%) and RCS 100 (95% or more) | GRS (50% to 100%) |
| Third-party audit of each stage | Yes | Yes |
| Environmental and social criteria | Not covered | Covered |
The 20% versus 50% point confuses many buyers. Textile Exchange’s FAQ states you can use the GRS as a business-to-business tool for products that contain at least 20% recycled content, but consumer-facing labelling requires at least 50%. Its Standards Claims Policy (V1.4) lists the GRS logo category as 50% to 100%.
The transaction certificate chain: the paper that matters
Certification covers companies, not garments. That is why two documents matter.
Scope certificate (SC). Textile Exchange defines it as a document issued by the certification body which verifies that an organisation is competent to produce and sell specified claimed materials in conformity with a standard. Its Quick Guide says an SC is the first step, “but does not verify that any particular product is certified”.
Transaction certificate (TC). The Quick Guide says buyers should request TCs from certified suppliers to verify they are getting certified products. The TC lists the shipment details and whether the material is pre-consumer or post-consumer recycled. The Claims Policy adds that TCs must include the exact percentage composition for the specific batch of product, and that only products covered by a valid TC are certified.
In practice, the chain for a recycled polyester T-shirt looks like this:
- The recycler or fibre producer holds an SC and issues a TC to the yarn spinner or texturiser for the recycled material it sells.
- The yarn or fabric mill, also certified, receives that material and issues its own TC when it sells on.
- Each later certified stage, such as the dye-house and the garment factory, repeats the pattern.
- The final seller in the business-to-business chain issues a TC to the brand.
Textile Exchange states that products must be certified up to the seller in the last business-to-business transaction, and that each stage must be certified, from the recycling stage to the last seller. A break at any point, such as a fabric trader without certification, removes the garment from the certified chain.
What the 5% threshold really means
Buyers often ask about the RCS 5% threshold. The RCS-101 document states the standard is intended for use with any product that contains at least 5% recycled material. The Claims Policy then sets two logo categories: RCS 100, with at least 95% certified recycled content, and RCS Blended, with 5% to under 95%.
Two practical consequences follow:
- A certified blend is a real claim, but a small one. A garment with 5% certified recycled polyester can carry an RCS claim, as long as the label states the percentage correctly. It cannot carry a GRS label, which needs at least 50%.
- Labels can reference a minimum percentage. The Claims Policy says labels may state “at least” a percentage, while the TC records the exact percentage for the batch.
For multi-material products, the policy says each certified material is listed separately with its percentage.
Verify the claim: a buyer’s checklist
These steps follow Textile Exchange’s published guidance. They are our practical reading, not a certification procedure.
- Ask for the scope certificate of every company that makes the claim, and check that it covers the standard (RCS or GRS), the products and the dates.
- Check the certificate in the “Find a Certified Company” database. The Claims Policy tip points retailers to this database to confirm a supplier’s certification.
- Ask for the TC for your shipment. It should match the product, quantity and exact recycled percentage.
- Compare the numbers. The recycled percentage on the TC, the label and your product page should agree. If a batch has more recycled content than the label says, the policy allows the label to stay at the approved lower figure.
- Check the license number or TE-ID on any physical label against the brand supplier’s scope certificate.
- Ask for the claim approval. Textile Exchange says all claims must be approved by an authorised certification body, and suggests asking for the approval form.
- Check the logo and wording against the Standards Claims Policy and logo specification before you print.
Recycled polyester claims in the US
Certification is voluntary, but advertising claims in the United States are regulated. The FTC’s Green Guides at 16 CFR 260.13 say it is deceptive to represent that an item contains recycled content unless it is composed of materials recovered from the waste stream, either pre-consumer or post-consumer. For items partly made of recycled material, the marketer should clearly and prominently qualify the claim to avoid deception about the percentage by weight. A certificate helps you substantiate this, but your wording still has to match the percentage.
Where recycled polyester claims usually fail
- “Eco” or “recycled” without a number. An unqualified claim implies the whole product is recycled.
- A scope certificate presented as proof of the shipment. The SC proves the company’s status, not that your order is certified.
- No TC for a specific order. Without it, the product is not certified, even if the supplier holds a certificate.
- A fabric trader in the chain without certification. Every stage must be certified.
- A GRS logo on a product under 50% recycled content.
- A certificate that has expired or does not name the standard.
- Mismatch between label and TC percentage.
What Finetex says it can support
Finetex’s sustainability page lists GRS recycled polyester among its certified fibre options, with the supporting certificate in the order file. It says transaction certificates for GOTS and GRS programmes are collected at order stage and filed per order, and that it will support a fibre or process claim only when the certificate exists. We do not state on this page that the factory itself holds a particular scope certificate. Before you commit to a claim, we ask you to request the current certificate and TC for your fabric lot and confirm it against the database. If a lot cannot be documented, the claim should not be made. Our fabric selection guide covers the fabric side, and our quality control page lists the inspection gates, including fibre composition checks against the tested sample.
Textile Exchange also notes it is moving to a unified Materials Matter Standard, effective 31 December 2026 and mandatory from 31 December 2027, so check the current rules when you place orders later.
What is fact, what is advice and what is uncertain
Fact (checked 12 November 2026): thresholds, logo categories, SC and TC definitions and claim rules come from Textile Exchange’s RCS and GRS page, RCS-101, the Quick Guide GRS-403 and the Standards Claims Policy V1.4; the Green Guides text comes from the eCFR.
Advice: the checklist and the common-failure list are our practical interpretation.
Uncertain: Textile Exchange is transitioning its standards, so the rules may change. A document that looks right can still be invalid, so rely on the certification body and the database. This is not legal advice on advertising claims.
Related reading
- GOTS vs OCS: Which Organic Claim Fits Your T-Shirt
- UFLPA and Cotton: Documents a Chinese Factory Must Supply
- China vs Bangladesh: When the Lowest FOB Is the Wrong Number
Frequently asked questions
What is the main difference between GRS and RCS?
Both verify recycled content and chain of custody. The GRS adds social, environmental and chemical requirements and has a higher minimum content for labelling (50%), while the RCS applies to products with at least 5% recycled content.
Can a garment with 30% recycled polyester carry the GRS logo?
No. Textile Exchange says consumer-facing GRS labelling requires at least 50% recycled content. A product with at least 20% can use the GRS as a business-to-business tool, and a certified blend of at least 5% can be covered by the RCS.
Which document proves that my order is certified?
The transaction certificate. The scope certificate shows the company is certified, but Textile Exchange states it does not verify that any particular product is certified. The TC lists the shipment and the exact percentage composition.
How do I check that a supplier is really certified?
Ask for the scope certificate, then confirm it in Textile Exchange’s Find a Certified Company database. Also match the license number or TE-ID on any label to the certificate.
Do I need certification to say a product contains recycled polyester?
Certification is voluntary. In the US, the FTC Green Guides require recycled content claims to be substantiated and, for partial content, qualified by percentage. Certification is one way to substantiate it.
Sources
- Textile Exchange: Recycled Claim Standard and Global Recycled Standard
- Textile Exchange: RCS-101 Recycled Claim Standard
- Textile Exchange: Quick Guide to the RCS and GRS
- Textile Exchange: Standards Claims Policy
- eCFR: 16 CFR 260.13, recycled content claims (FTC Green Guides)
Ask for recycled polyester with the paperwork attached
Tell us the garment, the recycled content you want to claim and the markets you sell in. We will confirm which certificates and transaction certificates exist for the fabric lot before you put a claim on your label.
Request a quote or read about our fabric selection guide.
More factory-floor notes for brand owners

Selling Underwear in Germany: Textilkennzeichnung, LUCID and Packaging Law
German textile labelling, LUCID registration and packaging law for underwear brands after the PPWR and VerpackDG took effect…
Read more →
GSM to Ounce Converter and Fabric Weight Chart
Convert fabric weight between gsm and oz/yd² with the exact factor (1 oz/yd² = 33.906 g/m²), a T-shirt…
Read more →
First-Output Check: The In-Line Inspection That Saves Bulk
What to check on the first garments off each line: measurements, seams, labels and print against the approved…
Read more →
A Fit Session Protocol for Knit Tops: 12 Wearers, 5 Measurements
A recommended fit session protocol for knit tops: recruit 12 wearers, take five measurements, run a movement checklist,…
Read more →
Corporate Uniform Programs: Tendering, Sizing and Reorders
How to run a corporate uniform program with a factory: tender documents, sizing a workforce, producing many sizes…
Read more →
Muscle Fit and Athletic Fit T-Shirts: Pattern Changes That Matter
How muscle fit and athletic fit T-shirts differ from a classic block: chest-to-waist drop, sleeve cap and bicep,…
Read more →Request a sample & pricing information
Send us your tech pack, target price or a reference sample — we reply with a quotation, a realistic lead time and a fabric recommendation within one working day.
- Free sampling plan & cost breakdown
- MOQ from 300 pcs per style
- Reply within 1 working day