Tech Pack Template: The 14 Pages a Factory Needs
A 14-page tech pack checklist for apparel factories, with the fields each page should carry, common omissions, and how to request a review of your pack.

Answer first: A factory can cut, sew and pack from a 14-page tech pack if those pages actually carry the measurements, materials, artwork, packing and test rules for the style. The list below is that checklist: what each page is for, which fields belong on it, and which omissions cause a sample to come back wrong. This article does not offer a downloadable file. If you want a copy of a worked example, or a review of a pack you already have, contact us and we will do that on the order file. It complements our earlier guide to the minimum tech pack a factory needs for underwear, and widens the same idea to a full apparel pack.
A tech pack is not a mood board and not a spreadsheet of prices. It is the instruction set that a pattern maker, a merchandiser, a cutting table and a packing line will share. If a fact lives only in an email, it will not be on the sample.
The 14 pages, and the fields each one should carry
Use these pages as a checklist. You may combine two short pages onto one sheet, but do not drop the fields. Number the pack, date it, and give every revision a new number.
| Page | Purpose | Fields that should be on it |
|---|---|---|
| 1. Cover and style summary | Identify the style | Style name and number, season, buyer, category, intended market, sample size, date, revision, a flat or photo of the approved direction |
| 2. Front and back flats | Show the garment clearly | Scaled front and back drawings, or clearly photographed fronts and backs, with grain and left/right obvious |
| 3. Construction and stitch callouts | Tell the sewing line how it is built | Seam types, stitch types, stitches per inch or centimetre, topstitch placement, bartacks, bonding or tape, thread colour |
| 4. Measurement points | Define how to measure | A point diagram that matches the names on the measurement chart; see our 12 knit-top measurement points |
| 5. Size chart and grade rule | Give every size a number | Sample-size measurements, increments or full chart, units, and inspection tolerances |
| 6. Fabric bill of materials | Lock the cloth | Fibre, structure, GSM, width, finish, colour reference, mill or quality code, shrinkage and any certificate to be collected |
| 7. Trim and label bill of materials | Lock everything that is not the main cloth | Elastic, thread, drawcords, zips, buttons, hooks, heat transfer, main label, size label, care label, hangtag, with supplier or quality codes and consumption per piece |
| 8. Colourways | Show every colour you will cut | Colour name, standard (lab dip, pantone or physical standard), which pieces take which colour, and whether top and bottom must match as a set |
| 9. Print, embroidery or application placements | Locate decoration | Placement from a defined point, size, rotation, colour separations, stitch count or print process, and a photo or drawing on the garment |
| 10. Artwork files | Give production the actual art | File names, colour mode, size at 100%, fonts converted to outlines, and which revision is current |
| 11. Packing and labelling | Tell the packing line how it leaves | Fold, polybag or box, warning copy, tickets, barcode or GTIN rules, inner and outer carton, marks, assortment |
| 12. Test requirements | State what must be tested | Test methods, required results, who pays, which lab, and whether tests are on fabric, trims or the finished garment |
| 13. Inspection and quality gates | State how the lot will be accepted | Incoming fabric check, in-line points, final AQL (Finetex publishes a final AQL 2.5), measurement audit, packing audit, shipment check against the approved sample |
| 14. Approval and revision history | Record what was agreed | Who approved the proto, the fit, the size set, the lab dips and the packed sample, with dates; a list of open issues |
Page 11 is where retail vendor rules belong if you have them: ticket placement, carton marks, and the data a customer will need for an advance ship notice. Page 12 is where you prevent a late argument about pilling, colourfastness or fibre composition. If a certificate or a test is a condition of the claim you will print, write it here and collect the document, as we do for fibre claims on our quality control and sustainability pages.
Common omissions that send a sample back
These are the gaps we see when a pack looks complete and still is not sewable:
- Flats without a measurement diagram, or a chart whose point names do not match the diagram.
- A size chart with no tolerance and no unit, or a grade rule that stops at the sample size.
- Fabric described only as “cotton jersey” with no GSM, width, finish or shrinkage.
- Trims missing from the bill of materials — especially size labels, care labels, thread colour and packing stickers.
- Artwork at the wrong scale, or a placement that is not measured from a defined point (collar seam, hem, centre front).
- No packed-sample instruction, so the factory sews a correct garment and bags it in a way the retailer will reject.
- No revision history, so an old print file is used after a new one was “sent yesterday.”
- A fibre or chemical claim with no document listed, which should not appear on a label.
A short example, kept generic: a knit top pack that includes flats, a chest measurement and a fabric name, but no neck-width point, no rib specification and no packed fold, will usually come back with a neck that was built from habit and a fold that does not match the photograph. Adding pages 4, 7 and 11 would have prevented the second sample.
How to use the checklist, and how to ask for a review
Work through the 14 pages against your current file and mark anything that is missing or that lives only in a chat thread. Put the missing fields into the pack, raise the revision number, and send that version with the sample request. If you do not have a design team, start from the underwear minimum-pack article and add the pages you need for the actual category (a lounge set, for example, needs set colour rules and a packed-set page).
We will review a pack as part of sampling, not as a public download. Contact us with the style, the category and the file you have. We will say which fields are missing, which we can complete with you, and which approvals (lab dip, size set, packed sample) should happen before bulk. Development samples take 5–7 working days after artwork and fabric are confirmed; a size set takes 10–12 working days. Our apparel design page is the right starting point for that work.
What happens to the pack inside the factory
Once the 14 pages are complete, different people use different sheets. Pattern uses pages 2 to 5. Purchasing uses pages 6 to 8 to reserve fabric and trims. The print or embroidery desk uses pages 9 and 10. The packing line uses page 11. Quality uses pages 12 and 13 against the approved sample recorded on page 14. If one of those groups is working from a different revision, the sample will be a mix of two instructions. That is why the cover date and the revision history are not administrative extras. Send one dated PDF or one dated folder, and say which revision supersedes the last.
What is fact, what is advice and what is uncertain
Fact: Finetex sampling lead times, final AQL 2.5 and the published inspection gates are company facts. There is no downloadable template file published on the live site, so none is linked here.
Advice: the 14-page list and the omissions are our practical checklist. Combining short pages is fine; dropping fields is not.
Uncertain: retailer manuals, test methods and certificate rules change. Always add the current account and market requirements to pages 11 and 12 rather than assuming this checklist already contains them.
Related reading
- Garment Measurement Points for Knit Tops: The 12 Numbers Buyers Argue About
- Apparel Cost Breakdown: Fabric, CMT, Trims, Packing and Overhead
- Men’s Polo Shirt Manufacturing: Pique, Interlock and Collar Construction
Frequently asked questions
Is there a downloadable tech pack file on this page?
No. The 14-page checklist is the template. If you need a worked example or a review of your pack, contact us and we will do that on the order file.
Do I need all 14 pages for a simple T-shirt?
You need all of the fields. A simple T-shirt may fit some fields onto fewer sheets, but skipping measurement points, trims, packing or a revision history is how a simple T-shirt still comes back wrong.
How is this different from the underwear minimum tech pack?
The underwear article is the minimum needed to sew a brief or boxer brief. This checklist is the same idea written as 14 pages, including packing, tests, inspection and a revision history, for knit tops and other cut-and-sew styles as well.
When should the packed sample be approved?
Before bulk, as part of the pre-production approval, using the fold, bag or box on page 11. A hangered fit sample does not prove packing.
What if my artwork is still changing?
Keep sampling, but do not release bulk until page 10 carries a dated, named file and page 14 records the approval. An undated “final” file is how the wrong print is cut.
Sources
- Finetex: what is the minimum tech pack a factory needs for underwear?
- Finetex: garment measurement points for knit tops
- Finetex: apparel design
Request a review of your tech pack
Send us the style, the category and the pack you have, even if some pages are incomplete. We will tell you which fields are missing and how we would sample from a completed revision.
Contact us or start on our apparel design page.
More factory-floor notes for brand owners

Selling Underwear in Germany: Textilkennzeichnung, LUCID and Packaging Law
German textile labelling, LUCID registration and packaging law for underwear brands after the PPWR and VerpackDG took effect…
Read more →
GSM to Ounce Converter and Fabric Weight Chart
Convert fabric weight between gsm and oz/yd² with the exact factor (1 oz/yd² = 33.906 g/m²), a T-shirt…
Read more →
First-Output Check: The In-Line Inspection That Saves Bulk
What to check on the first garments off each line: measurements, seams, labels and print against the approved…
Read more →
A Fit Session Protocol for Knit Tops: 12 Wearers, 5 Measurements
A recommended fit session protocol for knit tops: recruit 12 wearers, take five measurements, run a movement checklist,…
Read more →
Corporate Uniform Programs: Tendering, Sizing and Reorders
How to run a corporate uniform program with a factory: tender documents, sizing a workforce, producing many sizes…
Read more →
Muscle Fit and Athletic Fit T-Shirts: Pattern Changes That Matter
How muscle fit and athletic fit T-shirts differ from a classic block: chest-to-waist drop, sleeve cap and bicep,…
Read more →Request a sample & pricing information
Send us your tech pack, target price or a reference sample — we reply with a quotation, a realistic lead time and a fabric recommendation within one working day.
- Free sampling plan & cost breakdown
- MOQ from 300 pcs per style
- Reply within 1 working day