Digital Product Passport Data Fields Your Factory Must Capture
What a garment factory should start recording now for an EU Digital Product Passport, before the textile delegated act is adopted.

Answer first: A Digital Product Passport (DPP) for textile apparel is coming under the EU Ecodesign for Sustainable Products Regulation, but the official textile-specific field list is not yet law. As of 14 November 2026, the European Commission states that textile-specific DPP requirements will be set in a future delegated act, with adoption planned for the fourth quarter of 2027, and that those timelines may still change. The Commission’s indicative headings are product identification and characteristics, fibre composition, information for use, repair and maintenance, information for reuse, resale, disassembly, refurbishment, disposal and recycling, origin, and identification of the relevant economic operators. A factory that waits for a final 18-line form will be late. The useful work now is to capture, against each order, the production data those headings will need: fibre and bill of materials, fabric and dye lots, process locations, and the identities of the plants that actually made the product.
This article is a factory-side preparation guide. It updates, and does not replace, our earlier EU textile compliance outlook on the Digital Product Passport. It is general information, not legal advice. The summaries below come from official Commission pages and from Regulation (EU) 2024/1781 as published on EUR-Lex, all checked on 14 November 2026.
What is already decided, and what is not
The legal basis is the Ecodesign for Sustainable Products Regulation, Regulation (EU) 2024/1781. That regulation creates a framework. A DPP is a set of product-specific data, accessed electronically through a data carrier, containing the information specified in the delegated act that applies to that product group. Products may be placed on the EU market or put into service only if a DPP is available when the applicable delegated act so requires. The regulation also sets horizontal rules for the passport itself: a persistent unique product identifier, a data carrier on the product, its packaging or accompanying documentation, open and interoperable data, and access rights that a delegated act will specify. It also requires the delegated act to say whether the passport is established at model, batch or item level.
What the framework does not yet do is list the mandatory fields for a T-shirt or a pair of trousers. The Commission’s textile apparel DPP page, read on 14 November 2026, is explicit: textile apparel is a priority product group under the ESPR Working Plan 2025-2030; textile-specific DPP requirements will be defined through the same future delegated act that introduces the ecodesign requirements; and “the exact information requirements will be defined through the relevant delegated acts and supporting technical specifications.” The same page gives an indicative implementation timeline of Q4 2027 for planned adoption of the ESPR delegated act for textiles, then further guidance and technical specifications after adoption, with a footnote that timelines may evolve.
That is why this article does not publish an official “18-field” list. Eighteen fields was a planning angle, not a figure found in the legal text or on the Commission page we fetched. If a later delegated act or official technical specification sets a different, numbered field set, that official set will control, and this page should be read against the check date above.
The Commission’s current indicative headings, quoted in substance from the same textile page, are:
- Product identification and characteristics.
- Fibre composition, as required under the Textile Labelling Regulation, where relevant for the DPP.
- Information supporting use, repair and maintenance.
- Information relevant to reuse, resale, disassembly, refurbishment, disposal at end of life, and recycling.
- Origin information.
- Identification of relevant economic operators.
The same page says the DPP will be accessible at online points of sale and through a data carrier on the product itself, such as a QR code, and that authorities should also be able to reach conformity-assessment information required under applicable legislation. Those are headings and access rules, not a finished data dictionary.
Who has to supply the data
The Commission states that DPP requirements will apply primarily to economic operators placing textile apparel products on the EU market or putting them into service in the EU. Depending on the circumstances, those operators may be manufacturers, producers or importers. Distributors and dealers must ensure a DPP is available for the products they distribute or deal with in the EU. Some supply-chain actors, “notably suppliers of products or service providers, may be subject to specific requirements to provide relevant information that is available to them.”
For a brand that has garments cut and sewn in China and then placed on the EU market, the brand or the EU importer is likely to be the operator that must make the passport available. The factory is still the party that holds a large part of the underlying data: the bill of materials, the fabric lot, the dye lot, the sewing site, and often the first documents behind a fibre or recycled-content claim. If the factory cannot produce those records at order level, the operator cannot complete a passport later. That is a data problem, not an IT problem, and it starts now.
The records a factory should start capturing against each order
Until the delegated act exists, the honest approach is to map ordinary factory records to the Commission’s indicative headings, and to keep those records under the purchase-order number. The table is a preparation list. It is not an official field set, and it will have to be revised when the delegated act is adopted.
| Indicative heading (Commission, checked 14 November 2026) | Factory records to start keeping now | Typical source |
|---|---|---|
| Product identification and characteristics | Style number, season or collection code, colour and size range, and a bill of materials (BOM) that lists every fabric, thread, label and trim | Brand tech pack plus the factory BOM used to cut and sew |
| Fibre composition | Composition of each textile component, in the form used for labelling, with test reports where they exist | Fabric mill certificate, approved sample, composition test |
| Use, repair and maintenance | Agreed care method, any repair-related construction notes (for example a spare button, a stated stitch type) | Care label decision, tech pack, approved sample |
| Reuse, resale, disassembly, disposal, recycling | Fibre and trim identification that a sorter or recycler would need: main fabric, any blended fibres, trims that are not textile, and whether a component is separable | BOM, trim list, construction notes |
| Origin information | Country and site of cutting and sewing, and, where already documented, origin of the main fabric and yarn | Production records, fabric purchase documents, existing origin or chain-of-custody files |
| Economic operators | Legal names and addresses of the sewing factory, the fabric mill or trader actually used, and the dye-house where it is known | Business licences, purchase orders, invoices |
Three production identifiers deserve a line of their own, because they are how a later passport, whether it is set at model, batch or item level, will be tied to real goods:
- Fabric lot or roll number, as received and as issued to cutting, so that a colour or a fibre claim can be traced to a delivery.
- Dye-lot or dye-vat number, where the fabric is dyed or finished to order, because two rolls with the same quality name are not automatically the same batch.
- Cutting and sewing batch, meaning the production ticket or lay number that links a quantity of garments to the fabric lots they were cut from, and to the packing list.
Those three identifiers already appear, in a different legal context, in cotton-traceability and quality files. Our UFLPA cotton document guide and the incoming-fabric and packing checks on our quality control page are existing places to capture them. A DPP file that starts from a blank spreadsheet, while the same data sits unlinked in the cutting ticket, is wasted work.
How this sits with claims you already make
If a style will carry an organic, recycled or low-impact claim in the EU, the passport will almost certainly have to be consistent with the certificate file. That is already true for marketing claims. Finetex’s sustainability page states that the company will only support a fibre or process claim when the certificate exists, and that mill certificates, transaction certificates where the standard requires them, dye-house records and a composition statement are filed under the order number. The same discipline is described in our guides to GOTS versus OCS and GRS versus RCS. A DPP does not replace those certificates. It will need the same documents, stored so they can be pointed to from a product identifier.
Design decisions also become data. A style that is described as repairable, or as using a single fibre to aid recycling, has to be built that way in the apparel design file and in the BOM, not only in a product description. If a later official requirement asks for disassembly or repair information, the factory can only supply what the construction actually allows.
A practical timetable for a factory and a brand
The only official date on the Commission textile page is the planned Q4 2027 adoption of the delegated act, with further specifications to follow, and a warning that the timetable may change. There is, as of this check, no official “start recording by” date for garment factories, and no official list of 18 fields to implement in software this year. Waiting until the act is adopted, and then asking a mill for two-year-old dye-lot records, is the avoidable risk.
A practical sequence, offered as advice, is:
- Now: store, for every EU-bound style, a complete BOM, composition, fabric-lot and dye-lot identifiers, the sewing-site legal name and address, and the certificate file for any claim, all under the purchase-order number.
- As the delegated act is drafted and consulted: watch the Commission’s textile DPP page and the formal consultation, and compare the official field list, when it appears, with the records you already hold. Fill gaps then, not after the first season that needs a passport.
- After adoption: add the data carrier, the unique product identifier and the access rules that the act and the technical specifications will require. That is the IT and labelling step, and it should be built on a file that already exists.
Do not print a QR code that points to a marketing page and call it a DPP. Until the delegated act and the technical specifications exist, there is no official apparel passport to issue.
What is fact, what is advice and what is uncertain
Fact (checked 14 November 2026): Regulation (EU) 2024/1781 is the ESPR legal basis for the DPP. The Commission’s textile apparel page states that textile-specific requirements will be set in a future delegated act, with planned adoption in Q4 2027, that timelines may evolve, and that indicative information may include the six headings listed above. It also describes who, in principle, must make a DPP available. This article does not treat any unofficial 18-field list as law.
Advice: the order-level record table, the three production identifiers, and the three-step timetable are our practical reading for factories and brands preparing for an EU-bound programme.
Uncertain: the final field list, the model-versus-batch-versus-item rule for apparel, the data-carrier specification, application dates after the 2027 act, and any official technical dictionary are not yet adopted. JRC studies may inform the act; they are not themselves the legal field set. Recheck the Commission page and EUR-Lex before you design a system or a label.
This article is general information and is not legal advice.
Related reading
- UFLPA and Cotton: Documents a Chinese Factory Must Supply
- Forced-Labor Screening: Audit Trails That Survive Customs
- GRS vs RCS: Recycled Polyester Claims That Hold Up
- OEKO-TEX Standard 100 vs bluesign: What Each Certifies
Frequently asked questions
Is there an official list of 18 DPP fields for apparel?
Not in the official sources we fetched on 14 November 2026. The Commission’s textile page gives indicative headings and says the exact requirements will be defined in the delegated act and technical specifications, with planned adoption in Q4 2027. Treat any numbered unofficial list as a planning aid only.
When do garment factories have to issue a Digital Product Passport?
The Commission page, as read on that date, plans adoption of the textile delegated act in Q4 2027, with further specifications afterwards, and notes that timelines may change. Application dates will follow from that act. The operator who places the product on the EU market is the primary subject of the requirement; factories should already be able to supply the production data that operator will need.
What should we start recording if the field list is not final?
Against each order: the bill of materials and fibre composition, fabric-lot and dye-lot numbers, the cutting and sewing batch, the legal name and address of the sewing site and of the fabric source, and the certificate file for any claim you intend to make.
Does a QR code on the care label satisfy the DPP rules today?
No. Until the textile delegated act and its technical specifications exist, there is no official apparel DPP to point to. A data carrier will be part of the future requirement; a marketing QR code is not a substitute.
Sources
- European Commission: Textile apparel and the Digital Product Passport
- European Commission: Digital Product Passport
- EUR-Lex: Regulation (EU) 2024/1781 (ESPR)
- Finetex: EU textile compliance outlook and the Digital Product Passport
Build the order file before the passport rules land
Tell us the styles you plan to sell in the EU and which fibre or recycled-content claims you need to support. We will say what composition, lot and certificate records we can already file under the order number, and what still has to come from the mill.
Request a quote or start from our apparel design and quality control pages.
More factory-floor notes for brand owners

Selling Underwear in Germany: Textilkennzeichnung, LUCID and Packaging Law
German textile labelling, LUCID registration and packaging law for underwear brands after the PPWR and VerpackDG took effect…
Read more →
GSM to Ounce Converter and Fabric Weight Chart
Convert fabric weight between gsm and oz/yd² with the exact factor (1 oz/yd² = 33.906 g/m²), a T-shirt…
Read more →
First-Output Check: The In-Line Inspection That Saves Bulk
What to check on the first garments off each line: measurements, seams, labels and print against the approved…
Read more →
A Fit Session Protocol for Knit Tops: 12 Wearers, 5 Measurements
A recommended fit session protocol for knit tops: recruit 12 wearers, take five measurements, run a movement checklist,…
Read more →
Corporate Uniform Programs: Tendering, Sizing and Reorders
How to run a corporate uniform program with a factory: tender documents, sizing a workforce, producing many sizes…
Read more →
Muscle Fit and Athletic Fit T-Shirts: Pattern Changes That Matter
How muscle fit and athletic fit T-shirts differ from a classic block: chest-to-waist drop, sleeve cap and bicep,…
Read more →Request a sample & pricing information
Send us your tech pack, target price or a reference sample — we reply with a quotation, a realistic lead time and a fabric recommendation within one working day.
- Free sampling plan & cost breakdown
- MOQ from 300 pcs per style
- Reply within 1 working day