OEM & ODM apparel manufacturing since 2004 · Shenzhen, China

Landed Cost Calculator: FOB to Door in Six Inputs

Calculate apparel landed cost from FOB in six inputs: FOB value, quantity, volume or weight, duty rate, freight and fees. Method, worked example and checks.

Landed Cost Calculator: FOB to Door in Six Inputs

Answer first: Landed cost per piece equals the FOB total plus freight and insurance, plus duty on the customs value, plus fees and local charges, divided by the number of pieces. You need six inputs: FOB value, quantity, shipment volume or weight, the duty rate for your classification, the freight quote, and the fees and local charges. This page gives the formula, a worked example with illustrative numbers and the checks to run. There is no live tool here, and no tax rate is preloaded.

This is a method page, not an interactive calculator. A working calculator would need a duty rate, and duty rates and extra tariff layers change. Instead of embedding a rate that may go out of date, this page shows the structure so you can build it in a spreadsheet and fill the rate from your customs broker’s confirmation. For the longer cost-sheet version with nine cost lines and common omissions, read building a landed cost sheet. For the factory side of the price, see the apparel cost breakdown.

The six inputs

#InputWhere it comes fromUnit
1FOB valueYour quotation or proforma invoiceCurrency per piece, and total
2QuantityYour orderPieces
3Volume or weightPacking list: cartons, carton size, gross weightCBM or kg
4Duty rateYour customs broker, from the classification of the garment and originPercent of customs value
5Freight and insuranceForwarder quote for your route and modeCurrency per shipment
6Fees and local chargesBroker, port, customs entry, inland deliveryCurrency per shipment

Everything on the list is a number you can get in writing before you place the order. The first three come from the factory and the packing plan. The last three come from your forwarder and broker.

The calculation logic

Work in this order, because each step depends on the one before.

  1. FOB total = FOB per piece × quantity.
  2. Freight and insurance = the quote for your volume or weight and your route. For sea freight the price is usually driven by volume (CBM); for air freight by chargeable weight, which is the greater of actual weight and volumetric weight.
  3. Customs value. In the US, the customs value is generally the transaction value, the price actually paid or payable for the goods. International freight and insurance that are separately identified are not included in it. Other countries use different rules, so this step depends on your destination.
  4. Duty = customs value × duty rate (input 4). The rate includes any additional tariff layers that apply to your product and origin.
  5. Fees and local charges = customs entry and broker fees, port or terminal charges, government fees and inland delivery.
  6. Total landed cost = FOB total + freight and insurance + duty + fees and local charges.
  7. Landed cost per piece = total landed cost ÷ quantity.
Also check:  HTS Classification for Underwear, T-Shirts and Hoodies

Written as one line:

Landed per piece = (FOB total + freight and insurance + duty + fees) ÷ quantity

Some US fees are percentages of the customs value rather than flat amounts. The Merchandise Processing Fee for formal entries is an ad valorem fee, and the Harbor Maintenance Fee for ocean cargo is 0.125% of the cargo’s value under 19 CFR 24.24. The current MPF amount is adjusted every year, so use the figure your broker quotes instead of the base figure written in the regulation.

A worked example with illustrative numbers

All numbers below are illustrative. They are not Finetex prices, real duty rates or market data. The duty rate is a placeholder to show arithmetic, not a rate for any product.

InputIllustrative value
FOB per piece4.00
Quantity1,000 pieces
Volume3 CBM
Duty rate (placeholder)20%
Freight and insurance for the shipment600
Fees and local charges for the shipment400
StepCalculationResult
FOB total4.00 × 1,0004,000
Customs value (assuming freight excluded)= FOB total4,000
Duty4,000 × 20%800
Freight and insurancegiven600
Fees and local chargesgiven400
Total landed cost4,000 + 800 + 600 + 4005,800
Landed per piece5,800 ÷ 1,0005.80

In this made-up case a 4.00 FOB piece becomes 5.80 at the door, a 45% increase. A real shipment will differ. The point is to see which line moves the result most.

How to read the result

  • Landed per piece is your cost base. Price your product and measure margin from this number, not from FOB.
  • Duty is a percentage of value; freight is a share of volume. A higher FOB raises duty; a bulkier carton raises freight. Compare them separately.
  • Volume and weight matter. The same garment in a smaller carton can cost less to ship. Ask your factory for carton size and gross weight in the packing plan. See our shipping solution page for freight modes and transit times.

Assumptions to write next to the result

State the assumptions beside every landed-cost figure, so the number can be audited later:

  • The Incoterm used for the quote (for example FOB Shenzhen) and what it includes.
  • The customs value basis and whether freight is excluded.
  • The duty rate source, the classification and the date it was confirmed.
  • The freight quote date and validity, and the mode.
  • What is not included: sample cost, testing, design, storage, returns.
Also check:  Custom Men's T-Shirt Manufacturing: Sequencing Decisions So Cost Does Not Run Away

Using it as a spreadsheet

Set up six input cells, then the formulas above in the output cells. Keep the duty rate cell empty until your broker confirms it, and add a second scenario with a different rate to see sensitivity. Compare supplier quotes in separate columns: this lets you see how a lower FOB can be cancelled by a higher duty layer or higher freight; our article on China versus Bangladesh when the lowest FOB is the wrong number uses the same method to compare countries.

Fact, advice and uncertainty

Fact (checked 12 November 2026): under 19 CFR 152.103, the US transaction value is the price actually paid or payable, and separately identified international freight and insurance are not part of it; under 19 CFR 24.24 the Harbor Maintenance Fee on commercial cargo loaded or unloaded at covered ports is 0.125% of its value; formal entries are subject to an ad valorem merchandise processing fee under 19 CFR 24.23, adjusted each year. Finetex’s transit-time ranges are published on our shipping page.

Advice: the six-input structure, the order of steps and the assumption list. Have a licensed customs broker confirm classification, duty rate and fees before you price the order.

Uncertainty: duty rates and extra tariff layers change; the example rate is a placeholder. Freight prices change with the market and the route. Other countries’ customs value rules differ from the US rules cited here.

Related reading

Frequently asked questions

What is landed cost?

Landed cost is the total cost of getting a product to your door: the product price plus freight, insurance, duty, fees and delivery. Dividing it by the quantity gives the landed cost per piece.

Is duty calculated on FOB or on the landed cost?

In the US, duty is generally calculated on the customs value, which is the transaction value (the price paid or payable) without separately identified international freight and insurance. Other countries can use CIF value, which includes freight. Confirm the basis for your country with a broker.

Where do I find the duty rate?

The rate depends on the product classification and its origin. Your customs broker confirms it; the USITC Harmonized Tariff Schedule is the official US reference, and extra tariffs for a country of origin are listed separately.

Why is volume one of the inputs?

Sea freight is usually priced by volume and air freight by chargeable weight. Carton size and packing method change the volume, so the packing plan affects the freight line.

Also check:  Long-Sleeve Undershirts: A Year-Round Product for Basics Brands

Can Finetex quote DDP?

Our shipping page lists EXW, FOB Shenzhen or Yantian, CIF, CFR, DAP and DDP as available terms, depending on how much of the route you want us to own. Ask for the terms that fit your project in your quote request.

Sources

Get the inputs for your landed cost

Send us your style, quantity and destination. We will quote FOB with a carton plan (carton size and weight) so you can run the six inputs, and we can discuss the shipping terms that suit you.

Request a quote or see our shipping solution.

Keep reading

More factory-floor notes for brand owners

Request a sample & pricing information

Send us your tech pack, target price or a reference sample — we reply with a quotation, a realistic lead time and a fabric recommendation within one working day.

  • Free sampling plan & cost breakdown
  • MOQ from 300 pcs per style
  • Reply within 1 working day
Scroll to Top