OEM & ODM apparel manufacturing since 2004 · Shenzhen, China

ZDHC and MRSL: Chemical Compliance in a Chinese Dyehouse

How the ZDHC MRSL, chemical inventories, wastewater data and the ZDHC Gateway work for a Chinese dyehouse, and how a brand can verify them remotely.

ZDHC and MRSL: Chemical Compliance in a Chinese Dyehouse

Answer first: ZDHC (the Zero Discharge of Hazardous Chemicals Foundation) runs an industry framework for managing chemicals in textile, apparel, leather and footwear production. Its core tool, the ZDHC Manufacturing Restricted Substances List (MRSL), restricts hazardous substances in the chemical formulations a dyehouse buys and uses, rather than testing only the finished fabric. Around it sit a facility’s chemical inventory, wastewater and sludge testing against the ZDHC guidelines, and the ZDHC Gateway, where conformant chemicals are listed and facilities share reports such as Performance InCheck and ClearStream with their customers. A brand cannot see inside a dyehouse from abroad, but it can ask for those reports and check them on the Gateway. As of 15 November 2026, the current list is ZDHC MRSL V4.0, launched on 29 October 2026, with a transition that ZDHC says starts on 1 November 2026 and runs to 1 June 2028.

This article explains the framework from the dyehouse side and gives a remote-verification checklist. It is based on official ZDHC pages and documents read on 15 November 2026. ZDHC requirements are voluntary industry requirements, not law; national chemical and wastewater laws apply separately. Finetex is a garment maker: knitting, dyeing, printing and embroidery run through long-standing partner facilities, as stated on our capabilities page. We do not claim ZDHC signatory status or ZDHC reports of our own. Where a brand requires ZDHC evidence, it must come from the dyehouse that processes that order’s fabric, and we will say in writing whether the dyehouse for your programme can supply it.

The ZDHC framework: input, process, output

ZDHC organises chemical management into three stages, and it is easier to understand the documents if you keep them separate:

  • Input — what chemicals come into the facility. This is where the MRSL applies, together with conformance levels for chemical formulations.
  • Process — how chemicals are stored, used and recorded. This is the chemical management system and the chemical inventory.
  • Output — what leaves the facility: wastewater, sludge and air emissions, tested against ZDHC guidelines.

ZDHC’s Supplier to Zero assessment describes exactly that scope: it assesses how suppliers manage chemicals “from input (purchasing and traceability of chemicals and input materials), to process (use, storage, inventory) to output (wastewater and emissions)”. ZDHC states that facilities that manufacture fashion materials and finished products are in scope, while raw-material and fibre producers are outside Supplier to Zero. Supplier to Zero Version 2 was published on 31 July 2026; ZDHC gives a transition period from 1 August 2026 to 31 January 2027 and a mandatory implementation date of 1 February 2027.

A dyehouse is where the framework matters most for a knit garment. Dyes, auxiliaries, softeners, finishing agents and cleaning chemicals are all formulations, and the dyehouse is the facility that buys them and discharges the wastewater.

The MRSL: restricting chemicals at the source

The ZDHC MRSL page explains the idea: instead of trying to remove hazardous chemicals after making a product, manage chemical inputs from the start. The MRSL looks at the substances inside chemical formulations, sets limits for them, and identifies those banned from intentional use. A chemical formulation conforms to the MRSL when it does not contain listed substances above the MRSL limits.

That is different from a product Restricted Substances List (RSL) or a product test such as OEKO-TEX Standard 100, which looks at the finished article. Our article on OEKO-TEX Standard 100 versus bluesign explains product-level and input-level approaches. The two are complementary: a clean finished fabric test does not show what was discharged at the dyehouse, and a conformant chemical inventory does not replace a product test that a retailer requires.

Also check:  Custom Undershirt Manufacturing: What Is Worth Changing on a Layering Garment

MRSL V4.0 and its transition

ZDHC announced MRSL V4.0 on 29 October 2026. According to that announcement:

  • V4.0 introduces 16 substances not previously covered under V3.1, including bisphenols, formaldehyde, polychlorinated biphenyls (PCBs) and certain UV absorbers.
  • It lowers limits for substances including alkylphenol ethoxylates (APEOs), chlorinated paraffins and certain organic solvents.
  • It sets limits for unintentional PFAS contamination in formulations — 25 µg/kg for individual PFAS, 250 µg/kg for the sum of PFAS and 50 mg/kg for total fluorine — and confirms that intentionally added PFAS are not permitted in MRSL-conformant formulations.
  • Titanium dioxide has been removed following changes to its regulatory classification.

ZDHC’s MRSL V4.0 Industry Implementation Approach (October 2026) sets the timetable:

DateMilestone (ZDHC, read 15 November 2026)What it means for a dyehouse
1 November 2026Transition period beginsReview the chemical inventory against V4.0; ask suppliers about each formulation
15 December 2026Certifier applications openCertifiers prepare to assess formulations against V4.0
1 February 2027Formulation recertification beginsPrioritise V4.0-certified formulations for new purchases as they appear on the Gateway
1 November 2027Formulation recertification period endsNew purchases should be V4.0-conformant on the Gateway
1 June 2028Supply chain implementation period endsNon-conformant formulations phased out, including existing stock

The same document says existing stock of an unchanged formulation can continue to be used if the chemical supplier confirms that the updated certification applies to it, and that where no suitable alternative exists, continued use may be temporarily tolerated with emissions and exposure controls — but such use “does not constitute ZDHC MRSL conformance.” A brand asking for “V4.0 compliance” in November 2026 should therefore expect a transition plan, not a finished switch.

Conformance levels

ZDHC describes three levels of MRSL conformance for chemical formulations. Higher levels give more confidence that a formulation will consistently meet the MRSL, because more is known about the formulation and the formulator, and they involve independent third-party evaluation. The levels belong to the chemical product, not to the dyehouse. A dyehouse demonstrates its position by how much of its inventory is made up of conformant formulations.

The chemical inventory: the document that connects everything

A chemical inventory list (CIL) is the dyehouse’s list of every chemical formulation kept or used on site. ZDHC’s programme page says it should include the commercial name, safety data sheet information, CAS numbers of hazardous substances present, hazard information, conformance status, the amount stored or consumed, and the storage location. ZDHC recommends a stock take at least annually and monthly updates of delivery and usage information.

The inventory is the basis for the Performance InCheck report. ZDHC explains that a Performance InCheck report is based on the chemical inventory uploaded by a supplier through a ZDHC-approved third-party solution provider, and that it demonstrates the MRSL conformance of the facility’s chemical inventory. On the ZDHC Gateway it is shown by count and by weight.

For a brand, the inventory answers a question that a product test cannot: did this dyehouse use only conformant chemistry for the period in which your fabric was dyed?

Wastewater and sludge data

Output testing shows whether the inputs and processes worked. ZDHC’s Gateway describes a Wastewater Module where facilities register wastewater test data, benchmark conformance with the ZDHC Wastewater Guidelines, and share data with customers. The resulting ClearStream report is described as an easy-to-read report of a supplier’s wastewater and sludge performance tested against the ZDHC Wastewater and Sludge Guidelines, which can be shared with customers and avoid duplicative testing.

We have not summarised the parameters or limits from the Wastewater Guidelines here; they are technical and should be read in ZDHC’s current document. For a buyer, the practical points are simpler:

  • Ask which facility the report covers. A ClearStream report for a dyehouse is not evidence for a different mill or a printing subcontractor.
  • Check the reporting period and that it covers your production dates.
  • Look at whether results are shown as conformant and at what level, and read any non-conformance with its corrective action.
  • Remember that national discharge permits are separate from ZDHC. A ZDHC report does not replace the facility’s legal obligations.
Also check:  The Sustainable Apparel Supply Chain: Where the Impact Actually Sits, Tier by Tier

How a brand can verify remotely

ZDHC states that the Gateway is open to ZDHC Signatories and Friends and their supply chain partners, and that a signatory brand may invite its partners. If your brand is not on the Gateway, ZDHC also describes ChemCheck reports: a product passport for a chemical formulation that verifies its MRSL conformance, which can be shared with customers not yet engaged with the Gateway. A ChemCheck covers one chemical product, not the whole facility. A practical remote checklist:

  1. Name the facility. Get the legal name and address of the dyehouse that will process your fabric, in writing, before bulk fabric is ordered.
  2. Ask for the latest Performance InCheck report for that facility, and its date. Check whether the inventory is assessed against V3.1 or V4.0 during the transition.
  3. Ask for the latest ClearStream report and the period it covers.
  4. Ask for Supplier to Zero status, if the facility has been assessed, and whether it is moving to Version 2.
  5. Check on the Gateway if you have access, rather than relying on a PDF alone.
  6. Tie it to your order. Ask the garment maker to record the dyehouse name and dye-lot numbers against your purchase order. Finetex’s sustainability page states that dye-house process records are filed under the order number for low-impact dyeing claims, alongside fibre certificates and composition statements.
  7. Keep product testing. Continue the finished-fabric tests your market or retailer requires, and the incoming fabric checks described on our quality control page.

What not to accept

  • A logo or the words “ZDHC compliant” on a quotation, with no report and no facility name.
  • A report for a sister company or a different site.
  • A chemical supplier’s conformance certificate presented as if it proved the dyehouse’s whole inventory.
  • A claim of full V4.0 conformance this month without any transition plan, given ZDHC’s own timetable.

Fact, advice and uncertainty

Fact: ZDHC MRSL V4.0 was launched on 29 October 2026; ZDHC’s implementation approach starts the transition on 1 November 2026 and ends supply chain implementation on 1 June 2028. Supplier to Zero Version 2 becomes mandatory on 1 February 2027. Performance InCheck, ClearStream and ChemCheck are ZDHC report types, as described on ZDHC’s own pages. Finetex’s dyeing runs through partner facilities; Finetex does not claim its own ZDHC reports.

Advice: name the dyehouse, request InCheck and ClearStream reports for that facility and period, check them on the Gateway where possible, and keep product testing.

Uncertain: ZDHC documents, platforms and dates can change, and the Gateway was relaunched in 2026. Whether a specific partner dyehouse can supply current ZDHC reports must be confirmed for each programme. This article does not cover national chemical or wastewater law.

Related reading

Frequently asked questions

What is the difference between the ZDHC MRSL and a product RSL?

The MRSL restricts hazardous substances in the chemical formulations used during manufacturing. A product RSL, or a product test such as OEKO-TEX Standard 100, looks at the finished article. They answer different questions and are often used together.

Also check:  Shenzhen Clothing Manufacturer Ultimate Guide to Top Factories and Production

Which ZDHC MRSL version applies now?

ZDHC launched MRSL V4.0 on 29 October 2026. Its implementation approach says the transition begins on 1 November 2026, formulation recertification runs from 1 February 2027 to 1 November 2027, and supply chain implementation ends on 1 June 2028.

What reports should I ask a dyehouse for?

The latest Performance InCheck report for its chemical inventory, the latest ClearStream report for wastewater and sludge, and its Supplier to Zero status if assessed — all for the facility that will dye your fabric.

Is Finetex a ZDHC signatory?

No such claim is made on Finetex’s published pages. Dyeing runs through partner facilities, and ZDHC evidence, where a programme requires it, has to come from the dyehouse used for that order.

Can I verify ZDHC reports if my brand is not on the Gateway?

ZDHC says the Gateway is open to signatories, Friends and their supply chain partners. ChemCheck reports for individual chemical formulations can be shared with customers outside the Gateway, but they do not cover a whole facility. Ask for InCheck and ClearStream reports with facility names and dates, and consider joining if chemical management is central to your claims.

Sources

Ask which dyehouse will dye your fabric

Tell us the fabric, colours and any chemical-management evidence your brand or retailer requires. We will name the partner facility for your programme, say in writing which reports it can supply, and file dye-lot records under your order.

Request a quote or start from our custom fabric development and quality control pages.

Keep reading

More factory-floor notes for brand owners

Request a sample & pricing information

Send us your tech pack, target price or a reference sample — we reply with a quotation, a realistic lead time and a fabric recommendation within one working day.

  • Free sampling plan & cost breakdown
  • MOQ from 300 pcs per style
  • Reply within 1 working day
Scroll to Top