OEM & ODM apparel manufacturing since 2004 · Shenzhen, China

Shopify DTC Apparel Launch: The First 500 Units

How to plan a first 500-unit Shopify apparel order: SKU count, size curve, cash flow, replenishment and test styles, with a labelled illustrative allocation.

Shopify DTC Apparel Launch: The First 500 Units

Answer first: A first Shopify apparel launch is easier to wreck with too many SKUs than with too little design. Five hundred units is a useful planning quantity because it is large enough to cut and sew as a real production order, and small enough that a poor size curve or a second colour you cannot sell will tie up cash. This article is about how to allocate those units — by style, colour and size — and how to think about cash and replenishment, not about how to set up a Shopify theme. It complements our earlier guide to starting a private label T-shirt brand and choosing between POD and manufactured stock. Here we assume you have already chosen a manufactured run.

Five hundred is a planning number, not a hidden Finetex price break. Our published MOQ is 300–1,000 pieces per style, mixed sizes: stock fabric can start from 300 pieces, and a fully custom knit or dye lot usually starts at 1,000 pieces per colour. A 500-unit launch therefore fits a stock-fabric programme more naturally than a custom dye. If you need a custom colour, discuss whether 500 units can share a mill minimum, or whether the first buy should use a stock colour and move to custom on replenishment. For wholesale-style minimums on tees, see T-shirt wholesale for small brands. For how we run a private-label programme, see our private label page.

SKU count: fewer sellable options beat a full lookbook

A SKU, for this purpose, is a style-colour-size that you will hold, photograph, list and pack. A single T-shirt in two colours and five sizes is already ten SKUs. Add a second style and you have doubled the photography, the product pages, the packing complexity and the chance that one size of one colour sells out while another sits.

For a first 500 units, start with a hard cap and write it down:

  • One hero style is a coherent launch. Two styles is a collection. Three or more, at 500 units total, usually means each option is too thin to survive a normal size curve.
  • One or two colours, not a five-colour story. Colour is a dye-lot and a photography cost, and it splits the 500 units again.
  • A short size run. Five sizes (S–XXL) is already a wide net for a first order. Seven sizes will leave the ends of the curve with very small cuts unless you drop a colour or a style.

The test is operational, not aesthetic: if this style-colour sells through in two weeks, can you replenish it without waiting for a second colour that did not sell? If the answer is no, you have too many SKUs.

Print-on-demand remains available for experimental graphics, as the companion article discusses. The 500-unit manufactured run should be reserved for the style you are prepared to hold and refill.

Size curve: allocate on purpose, then label the allocation as a plan

A size curve is the share of the 500 units you place in each size. There is no official “correct” Shopify curve, and we will not invent one as if it were market data. The curve should come from whatever evidence you actually have — a pre-order, a previous drop, a wholesale account’s history, or, if you have none of those, a conservative middle-weighted plan that you are willing to revise after the first sell-through.

Also check:  What Are the Best Small Batch Cut and Sew Manufacturers in China: How to Read the Lists (and What They Leave Out)

The table below is an illustrative allocation of 500 units of one style in one colour across five sizes. It is not a recommended curve, not Finetex production data and not a survey of DTC brands. It exists so you can see how quickly the ends of the run become small, and so you can replace every cell with your own plan.

Size (illustrative plan only)Share of the 500Units in this illustration
S15%75
M30%150
L30%150
XL15%75
XXL10%50
Total100%500

What the illustration teaches:

  • Even a middle-weighted plan leaves only 50 units in XXL. A second colour would cut that to 25, which is a very short time-to-stockout if that size sells, and a slow leftover if it does not.
  • If your evidence says your customer skews larger or smaller, move the weight before you cut, not after the first weekend.
  • If you add a second style, do not copy the same 500-unit curve twice and hope. You would then need 1,000 units, or you must accept thinner sizes.

Write the curve on the purchase order and on the packing list. A factory can mix sizes inside the MOQ; it cannot guess which sizes you wanted if the PO only says “500 pieces, assorted.”

Cash flow: 500 units are paid for before they are sold

A manufactured order has a different cash shape from print-on-demand. You approve a sample, place a deposit, wait through production and transit, then receive goods you have already paid for, in full or nearly in full, before the first Shopify checkout.

Using Finetex’s published terms and lead times — not as a quotation, but as the calendar you have to plan around:

  • A development sample takes 5–7 working days after artwork and fabric are confirmed; a size set takes 10–12 working days. Sample cost is credited against the bulk order.
  • Bulk production runs 15–45 days from deposit and approved pre-production sample, depending on quantity, fabric and trims.
  • Transit, as published on our shipping solution page, is typically sea in the high-teens to mid-thirties of days depending on destination, or air in about 9–12 days door to door. Air costs more; it is a commercial choice when a launch date is fixed.
  • Payment is commonly T/T with a 30% deposit and the 70% balance against a copy of the bill of lading, with terms confirmed on the proforma invoice.

The planning consequence is straightforward. The deposit leaves your account at the start of production. The balance leaves around shipment, weeks before the goods are available to sell, and longer still if you choose sea freight. Photography, tickets, polybags, a Shopify theme and a paid-media test are extra cash that does not sit in the FOB. Build a simple calendar: sample approval, deposit, ex-factory, arrival, photography if not done from samples, go-live. If the go-live date is fixed, work backwards and decide whether air freight is cheaper than missing the date.

Also check:  T-Shirt Manufacturing Step by Step: Twelve Stages From Yarn to Packed Carton

Do not spend the planned replenishment money on a second colour before the first colour has sold. The first 500 units should teach you which size to refill, not fund a second experiment.

Replenishment and test styles: what the second order is for

The second order is where a launch becomes a brand. Plan it before the first order ships, even if you will change the numbers:

  • A reorder trigger, in units, not in feelings. For example, when a hero size-colour falls below a level you can cover during the next production-plus-transit cycle, you place the refill. The right level depends on your sales rate, which you will not know until after go-live, so set a conservative trigger and tighten it later.
  • A size-curve revision. If M and L disappear and S remains, the second PO should not repeat the first curve out of habit.
  • A test style or test colour, kept small. The second purchase order can carry a small cut of a new colour or a second style, but only after the hero is covered. A test that starves the refill is not a test; it is a stockout.
  • Fabric continuity. If the first 500 units were on a stock fabric, confirm that the same fabric will still be available for the refill, or accept a re-approval if the mill lot changes.

Quality gates do not change because the order is small: incoming fabric inspection, in-line checks at 30% and 70%, final AQL 2.5, and a shipment check against the approved sample and packing list. A 500-unit launch has no spare inventory with which to absorb a packing error or a wrong size sticker. Approve a packed sample, not only a fit sample.

A first packed sample should also be the photograph sample, or you should shoot from a size-set piece that you will not sell as new. Customers will compare the liveliness of a flat lay to the garment that arrives. If you plan marketplace fulfilment later, keep the first pack simple enough to relabel; do not over-build a boxed presentation you cannot afford to repeat on a refill.

What is fact, what is advice and what is uncertain

Fact: Finetex MOQ, sampling and bulk lead times, published transit ranges, quality gates and standard T/T 30/70 terms are as published on finetexglobal.com. The 500-unit table is an illustration only.

Advice: cap SKUs, write a size curve on the PO, plan cash against the deposit and transit calendar, and reserve the second order for refill plus one small test.

Uncertain: your sell-through, paid-media cost and preferred size mix cannot be known before the first drop. No conversion rate, no “average DTC curve” and no forecast revenue is stated here.

Related reading

Frequently asked questions

Is 500 units a Finetex minimum?

No. Our published MOQ is 300–1,000 pieces per style, mixed sizes, with custom dye lots usually starting at 1,000 pieces per colour. Five hundred is a planning quantity that often fits a stock-fabric first order.

How many styles should I put in a first 500-unit order?

Start with one hero style and one or two colours unless you have a clear reason to split further. Each extra style or colour thins the size curve and ties up cash in the slow option.

Also check:  OEM T-Shirt Manufacturing in China: From Your Tech Pack to an Approved PP Sample

How should I split sizes if I have no sales history?

Write a conservative, middle-weighted plan, label it as a plan, and revise it on the second order. The table in this article is only an illustration. Do not treat it as market data.

When do I place a refill?

When remaining stock will not cover the next production-plus-transit cycle at your current sales rate. You will only know that rate after go-live, so set a conservative trigger at launch and tighten it later.

Should the first 500 units be a custom colour?

Only if the mill minimum and your risk tolerance allow it. A stock colour reduces dye-lot risk on a first drop; custom colour is often easier to justify on replenishment once a size curve is proven.

Sources

Plan a first manufactured drop at a quantity you can refill

Send us the style, the fabric, the size run and the launch date. We will confirm whether 500 units is achievable on that fabric, and return a sampling plan and a quotation.

Request a quote or read about our private label programmes.

Keep reading

More factory-floor notes for brand owners

Request a sample & pricing information

Send us your tech pack, target price or a reference sample — we reply with a quotation, a realistic lead time and a fabric recommendation within one working day.

  • Free sampling plan & cost breakdown
  • MOQ from 300 pcs per style
  • Reply within 1 working day
Scroll to Top