OEM & ODM apparel manufacturing since 2004 · Shenzhen, China

Payment Terms That Protect a Small Buyer: T/T, LC and Escrow

Compare T/T 30/70, letters of credit at sight and escrow for small apparel orders: cash lock-up, risk and how to negotiate terms.

Payment Terms That Protect a Small Buyer: T/T, LC and Escrow

Answer first: For a small apparel order the three payment structures that come up most often are a telegraphic transfer split, usually 30 percent deposit and 70 percent against a copy of the bill of lading; a letter of credit payable at sight against documents; and a platform or escrow arrangement in which a third party releases funds when stated conditions are met. Each one moves cash and risk to a different moment in the order. None of them is automatically “safer.” The right choice depends on order value, whether the factory is new to you, and how long you can have money outstanding. This article compares the three methods, the cash they lock up, and a negotiation order that fits a first or second purchase. It is a companion to our earlier guide on deposit and balance payment terms, which covers the mechanics of a split transfer in more detail.

Finetex’s published terms, as stated on the credit and payment terms page and in the site FAQs, are T/T with a 30 percent deposit and 70 percent against the copy of the bill of lading, L/C at sight, and PayPal for samples. Staged credit terms are available after a documented trading history. Escrow or marketplace custody is discussed here as a third structure buyers ask about; it is not listed among our published methods, and we invent neither a fee schedule nor a platform name for it. Bank charges for letters of credit vary by bank; none are quoted below. This is general commercial information, not legal or trade-finance advice.

The three methods, in plain terms

T/T 30/70. You pay a deposit, usually 30 percent, to book fabric, trims and capacity. The remaining 70 percent is paid when the factory presents a copy of the bill of lading, or sometimes when the goods are ready and inspected, depending on the proforma invoice. The goods then move under the agreed Incoterm — often FOB Shenzhen or Yantian, as listed on our shipping page. The same structure is explained in Payment Terms: Deposit and Balance.

Letter of credit at sight. A bank (the issuing bank, usually yours) undertakes to pay the beneficiary (usually the factory) when the documents required by the credit are presented and found to comply. “At sight” means payment is due upon that complying presentation, not after a deferred period such as 30 or 60 days. The commonly used private rule set for documentary credits is the International Chamber of Commerce’s Uniform Customs and Practice for Documentary Credits (UCP 600). The ICC also publishes an electronic supplement, eUCP, for credits that allow electronic records. We do not quote individual UCP articles here; the credit itself, and the bank that issues it, control the transaction. A letter of credit substitutes the bank’s undertaking for a raw open-account promise, but only against the documents listed in the credit. It does not, by itself, inspect the garments.

Escrow or platform custody. A third party — a trading platform, a marketplace, or an escrow agent — holds the buyer’s funds and releases them when agreed conditions are met, such as confirmed shipment, an inspection pass, or expiry of a dispute window. The protection is only as good as the release conditions, the identity of the custodian, and the dispute process. This is not the same as a letter of credit, and it is not the same as PayPal, which Finetex publishes as a method for samples rather than for bulk production.

MethodWhen the factory is paidWhat actually triggers paymentWhat it does not do
T/T 30/70Deposit at order; balance against a copy of the B/L or as the PI statesYour transfer, after you accept the trigger documentsIt does not create a bank undertaking, and the deposit is already with the factory
LC at sightWhen complying documents are presented under the creditThe bank’s document check, not a garment inspectionIt does not guarantee quality, on-time sewing, or that the packing list matches what you hoped to receive
Escrow or platformWhen the custodian’s release conditions are metThe platform or escrow rules you signedIt does not help if the release conditions are weak, or if the custodian is not a party you can actually pursue
Also check:  Grading Rules for Knit Tops: Where Size Sets Fail

How each method ties up cash

A small buyer feels payment terms first as a cash-flow problem, not as a legal structure. The question is how long your money is unavailable, and at which point you still have leverage.

On a T/T 30/70, the 30 percent leaves your account when the order is accepted, often weeks before cutting if fabric is knitted or dyed to order. Finetex’s published bulk lead time is 15–45 days from deposit and an approved pre-production sample, depending on quantity, fabric and trims. The 70 percent typically goes out when the copy of the bill of lading is issued, before the goods reach your warehouse. Transit times on our shipping page are in the region of 18–25 days door to door by sea, longer on some routes, so the balance can be outstanding for the voyage plus entry.

On an LC at sight, you usually do not send a 30 percent deposit to the factory, but you do have to arrange the credit with your bank. That often means a facility, a cash margin, or a reduction in your available borrowing line for as long as the credit is open. The factory is paid when it presents complying documents, which, for a shipment on board, is typically around the same moment you would have paid a T/T balance. You have traded a factory deposit for a bank commitment. Whether that uses less cash depends on how your bank treats the credit, which is a question for the bank, not for a factory quotation.

On escrow or platform custody, funds are often collected up front or in stages and sit with the custodian until release. Your cash is locked even though the factory has not yet been paid. That can help on a first order if release depends on an inspection. It is costly if the platform holds the money for the full production window plus a dispute period. Fees belong to the platform’s current schedule; we do not quote them here.

A simple way to compare, without inventing a fee, is to write three dates on the same order: the day money leaves your account, the day the factory can use it, and the day you can sell the goods. The method that looks cheapest on a unit price can still be the tightest on cash if it pulls the first date forward.

Risks that matter on a small order

Deposit risk on T/T. The 30 percent is already at the factory. If production fails, if quality is rejected with no agreed remedy, or if the company you paid is not the sewing unit, recovery is a commercial dispute in another jurisdiction. That is why the work in our clothing factory sourcing guide — site identity, a sampled specification and a clear proforma — should be done before the deposit.

Document risk on a letter of credit. The bank pays against documents, not against the garments. A discrepancy in the invoice, the packing list, the bill of lading or a required certificate can delay or block payment, even when the cartons are fine. A credit that is drafted too loosely can also be honoured against documents that do not match what you thought you bought. Both problems are drafting and checking problems. Have your bank, and if needed a trade-finance adviser, review the credit text. Do not treat the factory’s first draft of the document list as final.

Quality and inspection risk on all three. None of the three methods is a substitute for a specified garment, an approved pre-production sample and a final inspection. Our quality control gates — incoming fabric, in-line checks, a final AQL 2.5 audit and a shipment check — are how quality is evidenced. If you want payment to wait on an inspection, that condition has to be written into the proforma (for T/T), into the credit (for an LC), or into the release rules (for escrow). Silent assumptions do not hold money.

Also check:  Digital Product Passport Data Fields Your Factory Must Capture

Platform and escrow risk. You are relying on a custodian’s rules, solvency and dispute process. Read who decides a quality claim, how long funds can be frozen, and what happens if the factory never ships. A marketplace “purchase protection” line is not automatically equivalent to a letter of credit.

Cost risk. Letters of credit carry opening, amendment and discrepancy charges. Escrow and platforms charge fees. T/T is usually cheapest in bank fees and most exposed on the deposit. Collect those charges from the institution that will levy them; do not take them from a factory article.

A negotiation order that fits a small buyer

On a first apparel order in the 300–1,000 piece band that Finetex publishes as a standard minimum, the factory is also taking a set-up risk: markers, a dye lot or a trim purchase that cannot be reused if you cancel. That is why a pure “pay after I receive the goods” request is often refused, and why a letter of credit can be disproportionate on a very small value once bank charges are included. A practical sequence is to negotiate the trigger and the evidence, not only the percentage.

  1. Start from a written proforma, with the style, quantity, Incoterm, inspection arrangement and payment clause in one place. Finetex confirms terms on the proforma invoice.
  2. On a first T/T order, negotiate what the 70 percent waits for, not only whether a deposit exists. A copy of the bill of lading is the published default. Some buyers ask for the balance to wait on a passed final inspection, or on a third-party report, with a short, dated window so the factory is not waiting indefinitely. That is a commercial point; it is not a promise that every factory will accept it.
  3. If the deposit feels too large, change the order shape before you change the method. Fewer colours, a stock fabric, or a single style can matter more than moving from 30/70 to 20/80. The cost logic behind that is in our volume tiering and apparel cost breakdown guides.
  4. Use a letter of credit when the order value justifies the bank process, or when your own finance team requires a bank undertaking. Keep the document list short and consistent with the packing and inspection you already planned. “At sight” should be a conscious choice, not a phrase copied from a template.
  5. Consider escrow or a platform only when you understand the release rules, and only if both sides can actually operate on that platform. Do not assume it is available because it is discussed in this comparison.
  6. After a documented trading history, staged credit may be available, as our published FAQs state. That is earned; it is not the opening position on order one.

Samples sit on a different track. A development sample takes 5–7 working days after artwork and fabric are confirmed, a size set takes 10–12 working days, and PayPal is the published method for samples.

What is fact, what is advice and what is uncertain

Fact: Finetex’s published payment terms are T/T 30/70 against a copy of the bill of lading, L/C at sight, and PayPal for samples, with staged credit after a documented trading history, as stated on the credit and payment terms page and in site FAQs. Published lead times and transit ranges are those on the quality, sampling and shipping pages cited above. The ICC describes UCP 600 as the Uniform Customs and Practice for Documentary Credits and eUCP as its electronic supplement; this article does not reproduce ICC rule text.

Advice: the cash-flow comparison, the risk list and the six-step negotiation order are our practical reading for small apparel buyers.

Uncertain: bank and platform fees, a particular bank’s margin requirement, and whether a given factory will accept an inspection hold on the balance, all have to be confirmed on the live order. Payment terms on the proforma control the transaction.

Related reading

Also check:  Cotton Fleece vs Polyester Fleece: Lounge and Activewear Guide — Buyer's Guide

Frequently asked questions

Is a 30/70 T/T safer than a letter of credit for a first order?

Not automatically. T/T is usually cheaper in bank fees, but the deposit is already with the factory. An LC at sight replaces that deposit with a bank undertaking against documents, at the cost of bank charges and a more formal document list. Safety comes from site identity, a clear specification, inspection and a tight payment clause, not from the name of the method alone.

Does “LC at sight” mean the bank inspects my garments?

No. Sight means the credit is payable when complying documents are presented, not after a deferred period. The bank examines documents against the credit. Quality still depends on the approved sample, the specification and the inspection you arranged.

Does Finetex offer escrow or platform custody on bulk orders?

It is not listed among the payment methods published on our credit and payment terms page or in the site FAQs. Those published methods are T/T 30/70, L/C at sight, and PayPal for samples. Ask at quotation if you need a different structure; do not assume escrow is available.

When can I ask for credit terms instead of a deposit?

Our published FAQs state that staged credit terms are available after a documented trading history. On a first order, negotiate the payment trigger and the inspection evidence rather than starting from open account. Write the clause on the proforma invoice, together with the Incoterm, the inspection arrangement and the document list.

Sources

Confirm payment terms on your quotation

Tell us the quantity, the market and whether you need T/T, a letter of credit at sight, or a discussion of another structure. We will put the payment clause, the Incoterm and the inspection point on the proforma before you pay a deposit.

Request a quote or read the published terms on our credit and payment terms page.

Keep reading

More factory-floor notes for brand owners

Request a sample & pricing information

Send us your tech pack, target price or a reference sample — we reply with a quotation, a realistic lead time and a fabric recommendation within one working day.

  • Free sampling plan & cost breakdown
  • MOQ from 300 pcs per style
  • Reply within 1 working day
Scroll to Top