OEM & ODM apparel manufacturing since 2004 · Shenzhen, China

EU GPSR for Apparel: Label, Listing and Responsible Person Requirements

What the EU General Product Safety Regulation asks of clothing brands: the EU responsible person, batch identification, label and listing fields, and documents.

EU GPSR for Apparel: Label, Listing and Responsible Person Requirements

Answer first: Since 13 December 2024, clothing sold to consumers in the EU falls under the General Product Safety Regulation (EU) 2023/988. In practice a brand needs an EU-established responsible person, a batch or type identifier on each product, its own and the responsible person’s contact details on the product or packaging, and the same information plus any warnings shown on every online listing.

The GPSR replaced the old General Product Safety Directive and applies to most non-food consumer products, including clothing and underwear. It does not add a new test for T-shirts or boxer briefs. What it changes is traceability and information: who in the EU answers for the product, how a garment can be identified if there is a problem, and what an online offer has to show before the customer buys. For a private-label brand manufacturing in China, the important point is that the listing now counts as much as the sewn-in label.

This guide summarises the provisions that matter for apparel, based on the regulation text checked on 11 November 2026 (consolidated version dated 29 May 2026). It is a practical reading of the rules, not legal advice; for your own product range, confirm with an EU compliance adviser or your responsible person.

What the GPSR covers for clothing

The regulation applies to products placed on the EU market that are intended for consumers or likely to be used by them, unless more specific EU safety legislation covers the same risk. For apparel there is no single harmonised “clothing safety” law, so the GPSR is the general safety net. It sits alongside rules that still apply separately:

  • Regulation (EU) No 1007/2011 on textile fibre names, which governs fibre composition labelling.
  • REACH chemical restrictions, which limit substances such as certain azo dyes in textiles that touch the skin.
  • Product-specific standards that authorities use as a benchmark, for example the European standard on cords and drawstrings in children’s clothing.

The GPSR’s general safety requirement in Article 5 means a product must be safe under normal or reasonably foreseeable use. For adult basics such as tees and underwear the main practical risks are chemical content, and for children’s wear also cords, small parts and flammability. The rest of the regulation is about proving and communicating that.

The responsible person: who it can be

Article 16 says a product covered by the regulation cannot be placed on the EU market unless an economic operator established in the EU is responsible for it. That operator can be one of the types listed in Article 4 of Regulation (EU) 2019/1020: an EU-based manufacturer, an importer, an authorised representative appointed in writing, or a fulfilment service provider where no other is established in the EU.

The responsible person’s tasks include holding or accessing the technical documentation, cooperating with market surveillance authorities, and informing them when a product presents a risk. Under Article 16(2) they must also regularly check that the product matches its technical documentation and carries the identification, contact and safety information required by Article 9.

A factory in China cannot be the responsible person, because it is not established in the EU. Finetex can print the responsible person’s details on labels and packaging, but the appointment itself is the brand’s decision and contract.

What has to appear on the garment or packaging

Article 9 sets the manufacturer’s information duties. For apparel, the brand selling under its own name is generally treated as the manufacturer.

  1. Identification (Article 9(5)). A type, batch or serial number or another element that identifies the product, easily visible and legible for consumers. Where the size or nature of the product does not allow it, the information can go on the packaging or an accompanying document.
  2. Manufacturer contact (Article 9(6)). Name, registered trade name or trade mark, postal address and electronic address, plus a single contact point if different. On the product, or where that is not possible, on the packaging or accompanying document.
  3. Instructions and safety information (Article 9(7)). Where needed for safe use, in a language easily understood by consumers in the Member State of sale.
  4. Responsible person (Article 16(3)). Name, trade name or trade mark and contact details, including postal and electronic address, on the product or its packaging, the parcel or an accompanying document.

For a T-shirt or boxer brief, the usual practical solution is a combination: style and batch code on the care label, and full addresses on the hangtag, packaging or insert card. Whether a sewn-in label has room depends on your label size and how many languages you print.

Where the fields usually go

The table below is a common layout, not a legal requirement. The regulation allows packaging or an accompanying document where the product itself cannot carry the information.

InformationCare or side labelHangtag, box or polybag insertOnline listing
Fibre composition (Reg. 1007/2011)Yes, required on label or markingOptional repeatRequired before purchase
Care symbolsUsual practiceOptional repeatRecommended
Style and batch codeRecommendedRecommendedProduct identifier and picture required
Manufacturer name and addressesIf space allowsCommon locationRequired
EU responsible person and addressesIf space allowsCommon locationRequired
Warnings or safety informationWhere relevantWhere relevantRequired where they exist

Online listings now carry part of the label

Article 19 is the change most sellers notice. For distance sales, including your own website, Amazon, Zalando or TikTok Shop, the offer must clearly and visibly show at least:

  • the manufacturer’s name, registered trade name or trade mark, and postal and electronic address;
  • where the manufacturer is not established in the EU, the name, postal and electronic address of the responsible person;
  • information identifying the product, including a picture, its type and any other product identifier;
  • any warning or safety information that must accompany the product, in a language consumers in that Member State easily understand.

Article 22(9) obliges online marketplaces to design their interfaces so traders can enter this information for each product, which is why marketplaces added GPSR fields to seller accounts. Separately, Article 16(1) of the textile labelling regulation requires the fibre composition to be clearly visible before purchase, including for online sales.

A practical rule: whatever is printed on the hangtag about the manufacturer, responsible person and warnings should be copied word-for-word into every EU listing for that style.

Batch traceability: making the code mean something

A batch code only helps if it links back to records. The aim is that if a complaint or authority request arrives, you can identify which production run, fabric lot and test reports apply.

A workable structure for a small brand:

  1. Assign a style number that stays the same across reorders.
  2. Add a batch or lot code per production run, for example year, month and run number.
  3. Print both on the care label or a size label.
  4. Keep a file per batch with the purchase order, fabric and trim lots, test reports, inspection report and shipping documents.
Also check:  How can I find a reliable men's boxer briefs manufacturer?

At Finetex, certificates and test reports are filed under the order number, and labels and packaging are produced in our own supply chain, so a batch code can be added to the care label proof at the specification stage.

Technical documentation and record keeping

Article 9(2) requires manufacturers to carry out an internal risk analysis and draw up technical documentation before placing a product on the market. The documentation must contain at least a general description of the product and its essential safety characteristics, and where appropriate, an analysis of possible risks, the solutions adopted, test reports and the standards applied. Article 9(3) requires it to be kept up to date and available to authorities for 10 years after the product is placed on the market.

For apparel, a proportionate file often includes:

  • a tech pack or specification sheet with fabric, trims and construction;
  • chemical test reports or certificates for fabric and trims, for example OEKO-TEX Standard 100;
  • for children’s wear, the risk review for cords, small parts and fastenings;
  • label and packaging artwork as approved;
  • inspection reports per batch.

Article 9 also requires manufacturers to provide public channels for complaints and accident reports, to keep an internal register of complaints, recalls and corrective measures, and to notify authorities through the Safety Business Gateway if a product placed on the market is dangerous.

What the factory can and cannot do

TaskFactory can helpBrand or responsible person owns it
Print batch codes on care labelsYesDecide the code format
Print manufacturer and responsible person details on hangtags or packagingYes, to your artworkSupply the correct legal details
Fibre composition and care labels to EU requirementsYesApprove the proof and languages
Provide fabric certificates and test reportsYes, where they existDecide what testing is needed
Appoint the EU responsible personNoYes
Fill GPSR fields in marketplace listingsNoYes
Risk analysis and complaints registerSupply product informationYes

A pre-shipment GPSR checklist

  1. Responsible person appointed, with a written agreement and their address confirmed.
  2. Batch or type code format agreed and on the care label proof.
  3. Manufacturer and responsible person details on the hangtag, packaging or insert.
  4. Fibre composition and care labels approved in the required languages.
  5. Test reports or certificates in the order file.
  6. Listing fields completed on every EU channel with picture, identifier and contact details.
  7. Complaint contact published and a complaints register set up.

Our care label requirements for the US and EU and EU underwear compliance checklist for online sellers cover the label content in more detail, and the private label service explains how labels and packaging are produced with your branding. For the wider launch process, see our apparel manufacturing guides.

What is fact, what is advice and what is uncertain

Fact: the obligations quoted from Articles 9, 16, 19 and 22 of Regulation (EU) 2023/988 and Article 16 of Regulation (EU) No 1007/2011, read on 11 November 2026. The GPSR applies from 13 December 2024.

Advice: the label layout, batch code structure and checklist are practical recommendations.

Uncertain: how strictly individual Member States and marketplaces enforce placement and language details. Penalties are set nationally. Confirm the details for your markets with your responsible person or an EU compliance adviser.

Related reading

Frequently asked questions

Does the GPSR apply to clothing?

Yes. Clothing and underwear sold to consumers in the EU are covered by Regulation (EU) 2023/988, which has applied since 13 December 2024, alongside the textile labelling regulation and REACH.

Also check:  Moisture-Wicking Undershirts: Building the Spec and the Evidence Behind the Claim

Who can be the EU responsible person for a clothing brand?

An economic operator established in the EU: an EU manufacturer, an importer, an authorised representative appointed in writing, or in some cases a fulfilment service provider. A non-EU factory cannot fill this role.

Does the responsible person’s address have to be on the garment?

It must be on the product or its packaging, the parcel or an accompanying document. Many apparel brands put it on the hangtag or packaging rather than on the sewn-in label.

What must an EU product listing show under the GPSR?

The manufacturer’s name and postal and electronic address, the responsible person’s details if the manufacturer is outside the EU, a picture and product identifier, and any required warnings or safety information.

Do I need a batch number on every T-shirt?

The product must bear a type, batch or serial number or other identifying element visible to consumers, or carry it on the packaging where the product cannot. A style and batch code on the care label is the common solution.

Can my factory handle GPSR compliance for me?

A factory can print codes and contact details, supply certificates and produce compliant labels. Appointing the responsible person, completing listings and keeping the complaints register remain the brand’s tasks.

Sources

Get EU-ready labels with your first order

Send us your responsible person details, markets and label artwork. We will prepare care label, hangtag and packaging proofs with batch codes and contact information before production starts.

Request a quote or see our private label service.

Keep reading

More factory-floor notes for brand owners

Request a sample & pricing information

Send us your tech pack, target price or a reference sample — we reply with a quotation, a realistic lead time and a fabric recommendation within one working day.

  • Free sampling plan & cost breakdown
  • MOQ from 300 pcs per style
  • Reply within 1 working day
Scroll to Top