ESPR and Ecodesign for T-Shirts: Durability, Recycled Content, Labelling
What the EU Ecodesign Regulation (ESPR) means for T-shirts as of November 2026: durability tests, recyclability, recycled content, labels and a checklist.

Answer first: As of 16 November 2026, there are no ESPR ecodesign requirements in force for T-shirts yet. The Ecodesign for Sustainable Products Regulation (EU) 2024/1781 is a framework: product rules arrive through delegated acts. Textiles, with a focus on apparel, are a priority in the Commission’s 2025–2030 working plan, and the Commission’s Digital Product Passport page gives Q4 2027 as the planned adoption of the textiles delegated act. What does already apply under ESPR is the ban on destroying unsold clothes, clothing accessories and footwear, in application for large companies since 19 July 2026 and for medium-sized companies from 2030. The technical groundwork for the future T-shirt rules is public: the Commission’s Joint Research Centre (JRC) preparatory study has proposed design options for information on robustness (appearance, spirality and dimensional change after five washes), a recyclability score in which garments with more than 15% elastane would score zero, and information or minimum levels for recycled content. These are draft options, not law. A T-shirt brand can prepare now by testing washed garments, documenting composition and recycled content, and keeping fibre and trim choices simple.
This article summarises official European Commission and JRC pages read on 16 November 2026. It is general information, not legal advice; confirm requirements for your products with a compliance adviser when the delegated act is adopted. For the data side, see our article on digital product passport data fields.
The ESPR framework
What ESPR is
The European Commission describes the ESPR as framework legislation that lays the foundation for concrete rules, set product by product or horizontally for groups of products. It entered into force in July 2024 and will ultimately replace the Ecodesign Directive 2009/125/EC. The regulation text is Regulation (EU) 2024/1781 on EUR-Lex. According to the Commission’s ESPR implementation page, the rules apply to all products placed on the EU market, whether produced inside or outside the EU. A T-shirt made in China and sold in the EU will be covered once the textile delegated act applies.
Where textiles sit in the timeline
| Milestone | What happened or is planned | Source |
|---|---|---|
| July 2024 | ESPR entered into force | Commission ESPR implementation page |
| April 2025 | 2025–2030 working plan adopted; textiles (focus on apparel) a priority | Commission Green Forum |
| December 2025 | JRC 3rd milestone working document on textile design options | JRC Product Bureau |
| 19 July 2026 | Ban on destroying unsold clothing and footwear applies to large companies | Commission news, 17 July 2026 |
| February 2027 | Standardised disclosure format for discarded unsold products applies | Commission ESPR implementation page |
| Q4 2027 | Planned adoption of the ESPR delegated act for textiles | Commission DPP textile apparel page |
| 2030 | Destruction ban extends to medium-sized companies | Commission news and textiles strategy |
The Commission’s 2025–2030 working plan announcement lists textiles, with a focus on apparel, among the priority products. The textile apparel DPP page states that textile-specific DPP requirements will be defined in the same delegated act as the ecodesign requirements, and that timelines may evolve.
The ban on destroying unsold clothes
The Commission’s news of 17 July 2026 explains that from 19 July 2026 large companies in the EU may not destroy unsold clothes, clothing accessories and footwear, and medium-sized companies will follow from 2030. Destruction is allowed only in specified cases, such as unsafe or damaged items, counterfeits, or items rejected by charities; companies relying on an exemption must provide proof and publish annual reports, and keep records for five years. Small and micro-businesses are exempt from these requirements. For a T-shirt brand, this makes overproduction a compliance issue as well as a cost one: plan quantities and size curves to sell through.
Durability
What the JRC proposed
The JRC’s December 2025 summary notes the lack of standardised tests that simulate ageing of apparel, and proposes instead a framework describing robustness: the ability to keep physical structure and appearance after external stresses. The key parameters are:
- Visual inspection (ISO 15487): colour change, staining and print pattern; fabric smoothness, pilling, fuzzing and matting; seam smoothness and slippage; function of non-textile parts such as labels.
- Spirality (ISO 16322-3): the twist of a garment after laundering.
- Dimensional change (ISO 3759).
All tests are performed on the finished product after 5 cleaning cycles following the care label, using ISO 6330 for machine washing (type A machine, flat dry) or ISO 3175-2 for dry cleaning.
The proposed performance levels for knitted products
| Parameter | Base case | Best available | Best not yet available |
|---|---|---|---|
| Visual inspection | 3, moderate change | 4, negligible change | 5, no change |
| Spirality (knitted) | 5% to 7% | 4% to 5% | below 5% |
| Dimensional change (knitted) | ±5% to ±6% | ±3% to ±5% | below ±3% |
These levels are reproduced from the JRC summary as published. The JRC states that a performance requirement on robustness “is not considered at this stage” because of uncertainties, and assesses an information requirement instead, for example a robustness score at the point of sale. It also states that the design options “are not final proposals”.
What this means for a T-shirt
The parameters are familiar to any good T-shirt programme: shrinkage, twist, pilling, colour change and neckline appearance after washing. Finetex’s T-shirt manufacturing page states that compact knitting and pre-shrinking bring residual shrinkage under 5% on cotton bodies, and that collar construction is checked with a two-wash test before bulk. Testing five washes on the finished garment, as the JRC proposes, is a sensible step to adopt now. Our article on neckline stability covers the most visible failure.
Recyclability and recycled content
The recyclability score
The JRC working document describes a 0–10 recyclability score. A product would be scored non-recyclable (0 points) if it contains more than 15% elastane (20% for blends with more than 80% polyamide 6). Below that, points would be added for:
- the same inner and outer composition;
- being free of prints, coatings, sequins and dyes;
- being mono-material;
- being mechanically recyclable (all garments below the elastane threshold);
- being pure cotton, a cotton-rich blend above 60%, a polyamide-6-rich blend above 80%, or an acrylic or polyester-rich blend above 80%, which match recycling routes at scale.
The JRC rejected a ban on non-recyclable products and on elastane, stating that elastane provides essential functions, but expects the information requirement to discourage excessive use. Many T-shirts contain little or no elastane, so for them the bigger design levers are blends, prints and trims. Our article on muscle fit T-shirts discusses elastane in fitted styles.
Recycled content
The JRC defines recycled content as the proportion by mass of recycled fibres and assesses an information requirement reporting that fraction, possibly with the type of waste it came from (post-consumer or post-industrial, fibre-to-fibre or from other sources such as PET bottles). It also assessed minimum thresholds, but states that setting them requires further optimisation and analysis of secondary material availability. Recycled-content claims already need chain-of-custody evidence; see our guide to GRS vs RCS.
Labelling
Three label regimes interact:
- Fibre composition is already mandatory under the Textile Labelling Regulation (EU) No 1007/2011. The Commission’s review page, checked on 16 November 2026, notes that the current regulation covers only fibre composition and describes a planned revision with a proposal “by the second quarter of 2026”; we did not find an adopted revision, so the 2011 regulation still applies as it stands.
- Care information: the JRC notes the Commission is considering harmonised, partly mandatory care labelling in the Textile Labelling Regulation revision.
- Ecodesign information and the DPP: the DPP will be accessible through a data carrier such as a QR code and online, and may include fibre composition, repair and maintenance information, end-of-life information, origin and economic operators, according to the Commission’s DPP page.
The JRC estimates the extra labelling cost of a robustness information requirement at about EUR 0.02 per unit, on the assumption that it can be added to existing hangtags. For EU labels in general, our article on EU GPSR for apparel covers the responsible person and product information.
Who carries the obligations
The Commission’s DPP page explains that DPP requirements will apply primarily to economic operators placing textile apparel on the EU market, who may be manufacturers, producers or importers depending on the circumstances. Distributors and dealers must ensure a DPP is available for products they sell, and some supply-chain actors may have to provide information that is available to them. For a brand importing T-shirts from China, that typically means:
- The brand or importer will be responsible for compliance, the DPP and any information requirements.
- The factory will be asked for data and evidence: composition, recycled content certificates, test reports, origin and process data.
- Fabric mills and dye houses hold much of the underlying data, so the factory must collect it from them.
What a factory can do, and what it cannot
A factory can test garments, record composition and trims per style, collect certificates and transaction certificates from mills, and keep the data per order. It cannot decide your legal role, register your products or make your compliance decisions; those stay with the business placing the product on the market. Agree in your supply contract which data the factory supplies, in what format and by when. Our article on DPP data fields lists the fields to request.
Design choices that help on several fronts
Several decisions improve likely scores and reduce risk under more than one rule at once:
- Mono-material or simple blends help the draft recyclability score and make composition labelling and recycled-content tracking easier.
- Compact, pre-shrunk fabrics improve dimensional change after washing, which also reduces returns.
- Fewer coatings and fewer non-textile parts simplify recycling and testing.
- Accurate size curves and smaller first orders reduce unsold stock, which matters under the destruction ban.
None of these requires waiting for the final act; each also makes commercial sense today. Finetex’s sustainability page notes that product longevity is one of the decisions that most affect a garment’s footprint, which is the same logic behind the robustness framework.
Preparation checklist
You can prepare without guessing the final law:
| Area | Action now |
|---|---|
| Durability | Test finished garments after five washes to the care label; record shrinkage, spirality, pilling and appearance |
| Fabric specification | Set shrinkage and twist limits in the fabric standard; prefer compacted or pre-shrunk jersey |
| Composition | Keep blends simple; record exact composition including elastane percentage |
| Decoration and trims | Note prints, coatings and non-textile parts per style; they affect the draft recyclability score |
| Recycled content | Keep mass-balance or segregated certificates and transaction certificates per order |
| Data | Capture style, composition, origin and supplier data per order for a future DPP |
| Quantities | Plan sell-through to avoid unsold stock you may not destroy |
| Monitoring | Check the Commission pages for the textile delegated act and Textile Labelling Regulation revision each quarter |
Finetex’s custom fabric page states that shrinkage, colour fastness, pilling and weight are tested before cutting, and its sustainability page describes fibre certificates and transaction certificates filed per order. Our apparel fabric selection guide helps choose fabrics with these factors in mind, and our EU textile compliance outlook gives the broader picture.
What is fact, what is advice and what is uncertain
Fact: ESPR is in force as a framework; no textile ecodesign delegated act had been adopted when we checked on 16 November 2026; the unsold-goods destruction ban applies to large companies from 19 July 2026; the textile delegated act is planned for Q4 2027; the JRC design options are as summarised above.
Advice: test finished T-shirts after five washes now, keep composition simple and documented, track recycled content with certificates, and plan quantities to avoid unsold stock.
Uncertain: the final requirements, thresholds, test methods and application dates. The JRC states its options are not final proposals, and the Commission notes that timelines may evolve. Ask a compliance adviser to review your range when the delegated act is published.
Related reading
- Digital Product Passport Data Fields Your Factory Must Capture
- GRS vs RCS: Recycled Polyester Claims That Hold Up
- GOTS vs OCS: Which Organic Claim Fits Your T-Shirt
- EU GPSR for Apparel: Label, Listing and Responsible Person Requirements
Frequently asked questions
Does ESPR apply to T-shirts now?
The framework is in force, and the ban on destroying unsold clothing applies to large companies from 19 July 2026. Product-specific ecodesign requirements for apparel had not been adopted when we checked; the Commission plans the textile delegated act for Q4 2027.
What durability tests might ESPR require for T-shirts?
The JRC has proposed describing robustness by visual inspection, spirality and dimensional change after five washes to the care label. These are draft options; the final act may differ.
Will elastane be banned?
No ban is proposed. The JRC’s draft recyclability score would rate garments with more than 15% elastane as non-recyclable; many T-shirts contain little or no elastane.
Is recycled content going to be mandatory?
The JRC assessed both an information requirement and minimum thresholds, but has not fixed thresholds. Track the delegated act.
Do factories outside the EU have to comply?
The rules apply to products placed on the EU market, wherever they are made. The brand or importer placing the product on the market carries the obligations, and will need data and test evidence from the factory.
Sources
- EUR-Lex: Regulation (EU) 2024/1781 (ESPR)
- European Commission Green Forum: Implementing the ESPR
- European Commission Green Forum: 2025–2030 working plan
- European Commission: Textile apparel and the Digital Product Passport
- European Commission: Ban on destruction of unsold clothes and shoes enters into application (17 July 2026)
- JRC: Summary of the 3rd milestone working document, textiles preparatory study (December 2025)
- European Commission: Review of Regulation (EU) 1007/2011
Test your T-shirt against the draft durability parameters
Send us your T-shirt specification or a sample. We will propose fabric and construction options, arrange shrinkage, spirality and appearance testing after washing, and document composition and certificates per order.
Request a quote or compare fabrics in our apparel fabric selection guide.
More factory-floor notes for brand owners

Selling Underwear in Germany: Textilkennzeichnung, LUCID and Packaging Law
German textile labelling, LUCID registration and packaging law for underwear brands after the PPWR and VerpackDG took effect…
Read more →
GSM to Ounce Converter and Fabric Weight Chart
Convert fabric weight between gsm and oz/yd² with the exact factor (1 oz/yd² = 33.906 g/m²), a T-shirt…
Read more →
First-Output Check: The In-Line Inspection That Saves Bulk
What to check on the first garments off each line: measurements, seams, labels and print against the approved…
Read more →
A Fit Session Protocol for Knit Tops: 12 Wearers, 5 Measurements
A recommended fit session protocol for knit tops: recruit 12 wearers, take five measurements, run a movement checklist,…
Read more →
Corporate Uniform Programs: Tendering, Sizing and Reorders
How to run a corporate uniform program with a factory: tender documents, sizing a workforce, producing many sizes…
Read more →
Muscle Fit and Athletic Fit T-Shirts: Pattern Changes That Matter
How muscle fit and athletic fit T-shirts differ from a classic block: chest-to-waist drop, sleeve cap and bicep,…
Read more →Request a sample & pricing information
Send us your tech pack, target price or a reference sample — we reply with a quotation, a realistic lead time and a fabric recommendation within one working day.
- Free sampling plan & cost breakdown
- MOQ from 300 pcs per style
- Reply within 1 working day