MOQ Calculator: What 500 Pieces Really Costs per Style
A fill-in method to spread sampling, fabric minimums, packaging set-ups and other one-off costs into the unit cost of 500 vs 3,000 pieces per style.

Answer first: The unit price on a quotation is only part of what 500 pieces cost. Every style also carries one-off costs — sampling, custom set-ups, packaging print minimums, any fabric bought above what the order consumes — and those are divided by the number of pieces you actually make. The method is simple: true unit cost = variable cost per piece + (sum of one-off costs ÷ quantity) + (leftover-material cost ÷ quantity). At 3,000 pieces, each one-off cost is spread over six times as many garments as at 500, so its share per piece is one-sixth. That arithmetic, not a factory’s goodwill, is why small runs cost more per unit and why “what drives my minimum?” is a better question than “can you go lower?”
This page gives the calculation as a fill-in table. It contains no prices: every amount is a variable you replace with figures from your own quotation. Finetex quotes by component — fabric consumption, labour operations, trims and packing, with margin shown separately — according to its FAQ, which makes these inputs visible. For the landed side (freight, duty, fees), use our landed cost calculator.
The inputs
Collect these for one style and one colourway. Use your quotation, not guesses.
| Input | Symbol | Type | Where it comes from |
|---|---|---|---|
| Order quantity | Q | Count | Your plan (e.g. 500 or 3,000) |
| Variable cost per piece | V | Per piece | Quotation: fabric consumed, labour, trims, packing per unit |
| Sampling not credited | S | One-off | Sampling quotation, net of any credit against bulk |
| Custom set-ups and tooling | T | One-off | Screens, jacquard waistband set-up, embroidery files |
| Packaging print set-up | K | One-off | Printer’s set-up or plate charges for boxes, bags, inserts |
| Material bought above need | X | One-off | Fabric, elastic or printed packaging bought to meet a supplier minimum but not used |
| Testing for the style | L | One-off | Lab tests your market or retailer requires |
The formula
True unit cost = V + (S + T + K + L) ÷ Q + X ÷ Q
Write it in a spreadsheet with Q in one cell and every other input in its own cell. Change Q and read the result. That is the calculator.
Sampling
Finetex’s published terms charge pattern development and sampling at cost and credit them against the bulk order; if the programme does not proceed, the cost stands. If your quotation credits sampling, S may be zero or small for a qualifying order. Couriers and lab tests are commonly outside the credit; put tests in L. Our article on sampling cost recovery explains which parts are usually credited.
Fabric minimums
Fabric is where small runs hurt most. On Finetex’s custom fabric page, most mills require 500–1,000 kg per colour for a custom knit, which typically corresponds to 1,500–3,000 garments depending on weight. At 500 pieces of a custom knit, either you buy the full mill minimum and carry the surplus (X), or you switch to a stock fabric and develop only the colour. Finetex’s FAQ puts the stock-fabric MOQ at 300 pieces per style, mixed sizes, and around 1,000 per colour for a custom knit or dye lot.
Packaging
Printed boxes, bags and inserts carry the printer’s set-up costs and minimums. The FAQ notes that custom jacquard waistbands and printed packaging carry their own set-up minimums, listed in the quotation. Put set-up charges in K, and any printed stock beyond the order in X. Finetex’s private packaging page lists the packing formats.
500 vs 3,000: the comparison
Fill in the same inputs for both quantities. Only the shares of one-off costs change, unless your quotation shows a different V at volume.
| Line | 500 pieces | 3,000 pieces |
|---|---|---|
| Variable cost per piece | V₅₀₀ | V₃₀₀₀ |
| One-off costs per piece | (S + T + K + L) ÷ 500 | (S + T + K + L) ÷ 3,000 |
| Surplus material per piece | X₅₀₀ ÷ 500 | X₃₀₀₀ ÷ 3,000 |
| True unit cost | sum | sum |
Three observations follow without any assumed price:
- The one-off share at 3,000 is exactly one-sixth of the share at 500. If one-off costs are large compared with V, the 500-piece unit cost will be much higher.
- Surplus material can disappear at volume. If 3,000 pieces consume the full fabric minimum, X₃₀₀₀ may be zero while X₅₀₀ is large.
- V may also change. Volume can change fabric price, labour efficiency and trim pricing. Our article on volume tiering at 500, 3,000 and 10,000 pieces explains why the biggest step is usually between 500 and 3,000.
Ways to lower the 500-piece cost
- Use stock fabric and develop the colour only, to avoid a large X.
- Share fabric across styles. Two styles in the same fabric and colour can use one fabric minimum. Our Talk article on colour MOQ planning across styles covers this.
- Use standard waistbands and packaging for the first run, and add custom set-ups once the style sells.
- Consolidate sampling comments so fewer rounds are needed.
- Plan the reorder. One-off costs paid on the first order, such as tooling, may not recur, so the second order’s unit cost can be lower.
Fact, advice and uncertainty
Fact: Finetex publishes component-based quotations, a 300-piece stock-fabric MOQ per style, around 1,000 per colour for a custom knit or dye lot, mill minimums of 500–1,000 kg per colour for custom knits, and sampling credited against bulk.
Advice: list every one-off cost, divide by quantity, and compare 500 and 3,000 on the same inputs before choosing.
Uncertain: your actual figures. They depend on fabric, trims, packaging and the market, which is why this calculator contains no preset prices.
Related reading
- Landed Cost Calculator: FOB to Door in Six Inputs
- Volume Tiering: How Price Breaks Work at 500, 3,000 and 10,000 Pieces
- Apparel Cost Breakdown: Fabric, CMT, Trims, Packing and Overhead
- Sampling Cost Recovery: What Factories Build Into the Quote
Frequently asked questions
Why does 500 pieces cost more per unit than 3,000?
One-off costs — sampling not credited, tooling, packaging set-ups, tests and any surplus material — are divided by the quantity. At 3,000 pieces each one-off cost per piece is one-sixth of its share at 500.
What is the minimum order at Finetex?
The published MOQ is 300 pieces per style on stock fabric, mixed sizes, and around 1,000 per colour for a custom knit or dye lot.
Does this calculator include prices?
No. Every amount is a variable. Replace them with your own quotation figures in a spreadsheet.
How do I avoid surplus fabric on a small order?
Choose a stock fabric and develop only the colour, or share one fabric and colour across several styles.
Sources
- Finetex: Frequently asked questions
- Finetex: Custom fabric development
- Finetex: Private packaging
- Finetex: Clothing manufacturer MOQ explained
Get the inputs for your own calculation
Send us the style, fabric, packaging and the quantities you are comparing. We will quote by component, show which minimums apply, and say which one-off costs recur on a reorder.
Request a quote or start from our underwear manufacturing page.
More factory-floor notes for brand owners

Selling Underwear in Germany: Textilkennzeichnung, LUCID and Packaging Law
German textile labelling, LUCID registration and packaging law for underwear brands after the PPWR and VerpackDG took effect…
Read more →
GSM to Ounce Converter and Fabric Weight Chart
Convert fabric weight between gsm and oz/yd² with the exact factor (1 oz/yd² = 33.906 g/m²), a T-shirt…
Read more →
First-Output Check: The In-Line Inspection That Saves Bulk
What to check on the first garments off each line: measurements, seams, labels and print against the approved…
Read more →
A Fit Session Protocol for Knit Tops: 12 Wearers, 5 Measurements
A recommended fit session protocol for knit tops: recruit 12 wearers, take five measurements, run a movement checklist,…
Read more →
Corporate Uniform Programs: Tendering, Sizing and Reorders
How to run a corporate uniform program with a factory: tender documents, sizing a workforce, producing many sizes…
Read more →
Muscle Fit and Athletic Fit T-Shirts: Pattern Changes That Matter
How muscle fit and athletic fit T-shirts differ from a classic block: chest-to-waist drop, sleeve cap and bicep,…
Read more →Request a sample & pricing information
Send us your tech pack, target price or a reference sample — we reply with a quotation, a realistic lead time and a fabric recommendation within one working day.
- Free sampling plan & cost breakdown
- MOQ from 300 pcs per style
- Reply within 1 working day