OEM & ODM apparel manufacturing since 2004 · Shenzhen, China

Why do undershirts develop armpit odour that does not wash out?

Why undershirts develop armpit odour that does not wash out: fibre type, residues, low-temperature washing, fabric softener, and what brands can change in fabric and care…

Why do undershirts develop armpit odour that does not wash out?

Part of T-Shirts, Undershirts & Tank Tops in Finetex Talk — buyer questions answered by the Finetex editorial team.

The question

Customers of a wicking polyester undershirt complain that the underarms smell again soon after putting on a freshly washed shirt. Cotton styles in the range get fewer complaints, and the team wants to understand why and what to do.

Finetex Editorial Team – Main answer

Short answer: Persistent armpit odour usually comes from body oils, sweat residues and deodorant build-up in the fabric that normal washing does not fully remove, where odour-forming bacteria thrive. Synthetic fibres such as polyester tend to hold oily residues more than cotton, so smells return quickly when the fabric warms up again. Low-temperature washing, short cycles, overloading, too little detergent and fabric softener build-up make it worse. Brands can choose fibres and blends less prone to holding odour, such as cotton, modal or polyester blends with these fibres, consider an odour-control finish with care, and give clear washing advice. Any antimicrobial or odour-control treatment must comply with local rules, such as the EU Biocidal Products Regulation for treated articles, and claims need evidence. Advise customers to wash undershirts after each wear, use enough detergent, avoid fabric softener on technical fabrics and, where the label allows, wash warmer occasionally.

Why odour stays

  • Polyester and nylon bind oily residues.
  • Deodorant and antiperspirant residues build up in the underarm area.
  • Low-temperature short cycles do not remove oils fully.
  • Fabric softeners coat fibres and trap residues.
Also check:  100% cotton or cotton/poly fleece for hoodies?

Fabric options

  • Cotton, modal or viscose: less prone to holding oily odours.
  • Polyester blends with cellulosic fibres.
  • Fabrics with odour-control finishes, after checking regulations and durability.
  • Merino wool for premium lines.

Care advice for customers

  • Wash after each wear, inside out.
  • Use the recommended dose of detergent.
  • Avoid fabric softener on technical fabrics.
  • Wash at the highest temperature the label allows from time to time.
  • Dry fully before storing.

Testing

Wear trials with the same testers wearing different fabrics on similar days give the clearest comparison. Wash the garments following ISO 6330 procedures between wears and record odour assessments.

A worked example

As an illustration, if testers report stronger odour from the polyester style than from a cotton-modal blend after a week of wear and washing, the brand could add the blend as an alternative and update care advice for the polyester style.

Responding to complaints

When customers report odour, ask how they wash and dry, and share the care advice rather than blaming them. Repeated complaints on one style or lot point to the fabric or finish rather than individual habits.

Limits

Personal body chemistry and laundry habits vary greatly. No fabric eliminates odour for everyone.

Facts, recommendations and uncertainty

Established: oily residues and deodorant build-up cause persistent odour, especially in synthetics. Recommendation: choose suitable fibres, give clear care advice and use compliant finishes only with evidence. Uncertain: how much each customer's habits contribute.

Sources and further reading

Standards and regulations are referenced by their published scope. Test parameters, cycles and pass levels should be agreed with your laboratory for the specific product; legal requirements should be confirmed for each destination market.

Three more perspectives

Finetex Editorial Team – Product Development

Compare fabrics in wear trials with real testers through repeated wearing and washing. Check that blends keep the wicking and quick-dry properties customers expect. Record the approved fabric and any finish in the tech pack, and update the product page with care advice. If you add a finish, test that wicking and softness survive washing, because some finishes change the hand feel or reduce wicking.

Finetex Editorial Team – Quality & Care

Track odour complaints by fabric lot and style. For finished fabrics, request evidence that each lot received the specified finish. Check that care labels and product page instructions match, and keep washed samples for reference when complaints arrive. When a complaint arrives, check the returned garment for residues, such as stiff or discoloured underarms, which show build-up rather than a fabric fault.

Related products

Related articles

← More in T-Shirts, Undershirts & Tank Tops · All Talk topics · Ask us about your programme

Keep reading

More factory-floor notes for brand owners

Request a sample & pricing information

Send us your tech pack, target price or a reference sample — we reply with a quotation, a realistic lead time and a fabric recommendation within one working day.

  • Free sampling plan & cost breakdown
  • MOQ from 300 pcs per style
  • Reply within 1 working day
Scroll to Top